bing tracking image
Q & A Icon

Tips for Installing the Curt Trailer Hitch on a 2023 Toyota Crown  

Question:

So tell me what you think is important for me to know? How long does it take on average to install this hitch on my 2023 Toyota Crown knowing I have no experience, 76 yrs old and somewhat mechanically inclined? Do you have pictures you can send me so I can see what I have to cut and the cutting tool I need to cut it with? You mention drilling since you have installed this hitch on a Toyota crown was drilling needed? How difficult is dropping the tail pipe and where do I get the special tool that is needed and the cost? Will I need a lift to install it or can I lay on my back on the ground to do It. Please answer all the questions it is very important to me. Thank you

0

Expert Reply:

Hey Ed, thanks for reaching out!

The Curt Trailer Hitch Receiver # C77ZV is rated a 10 out of 10 for difficulty and will take the average (experienced) mechanic about 1 hour and 40 minutes to install on your 2023 Toyota Crown. Since you haven't installed a hitch before I would set aside 2-3 hours for yourself to complete the installation - it does help that you're mechanically inclined.

- Attached is a snapshot photo of how the hardware will be configured, but you can check out the linked installation instructions for some photos.
- We typically use tin snips to cut fascia, but realistically anything that can cut cleanly through thicker plastic will work just fine.
- You won't need to drill new holes in your frame, but you will need to use a die grinder to enlarge the holes so you can run the hardware through your frame.
- Lowering the exhaust isn't too bad, you just need a strap secured underneath it to act as a sling while it isn't connected to the hangers. The hardest part is typically removing the exhaust from the hangers. You'll need silicone spray # RM-747 and a pry bar to accomplish this.
- I'm not sure if a lift is needed, but you definitely need ramps at the very least. I installed a hitch on my van by myself with some ramps and it was doable, but I also didn't have to lower the exhaust.

I'm also attaching a snip from the instructions showing you what tools you'll need for the installation.

expert reply by:
0
Jon G
Hardware Configuration for 2023 Toyota Crown Curt Trailer Hitch Install
Hardware Configuration for 2023 Toyota Crown Curt Trailer Hitch Install
(click to enlarge)
Tools Needed to Install Curt Hitch on a 2023 Toyota Crown
Tools Needed to Install Curt Hitch on a 2023 Toyota Crown
(click to enlarge)

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>