Can I Use A Higher Rated Leaf Spring On A Shoreline Boat Trailer?
Question:
Hi, I have an older tandem axle Shoreline boat trailer which I use for my 24-foot grady white. I recently replaced my leaf springs, including shackles, equalizer, and ubolts. When my boat is off, everything looks finesprings have a normal amount of curve. But when I load my boat on the trailer, the rear leaf springs flatten out and the equalizer pivots forward so the shackles are very close to the trailer frame and may even touch on unlevel ground. The springs are rated for 3500-lb axles and I would estimate the boat to weigh 4000-4500 lbs total including motor, fuel, accessories. I took the trailer to a local shop and they said the springs look to be installed correctly and they should hold my boat fine. But it seems the rear axle and springs may be taking more of the load than the front. I was considering either trying heavier springs maybe 6000-lb rated, part e47SR in the rear, or possibly moving the bow stop forward to move the boat forward, though I only have 6-8 inches of space to move it foward. I was curious if you had any suggestions one way or another. Thanks
asked by: Ben E
Expert Reply:
Hello Ben. Anytime we see a trailers suspension go "wonky" like that it is almost always due to incorrectly sized suspension components. Since you say you replaced things recently, I suspect this is the issue. If the equalizer is pivoting forward and hitting the frame, this could mean your springs are too long. I do recommend that you stick with a spring that is appropriately rated for your trailer. You would not want to put a 6,000 lb spring on a 3,500 lb axle.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 6000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/8 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Video: Curved Equalizer for 1-3/4" Wide Double-Eye Springs Review
- Article: Double-Eye Trailer Suspension System Review
- Search Results: trailer leaf springs
- Shop: Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Video: Detailed Breakdown of the Replacement U-Bolt w/Nuts for 8,000-lb, Round Trailer Axles
- Q&A: What is the Capacity of a Round Trailer Axle with a 3 Inch Diameter
- Search Results: shackle straps
- Shop: 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
- Shop: 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 5K Trailer Axles - 25-1/4" Long - Dacromet
- Search Results: leaf spring shackle
- Q&A: Replacing Leaf Springs On A Coachmen Freedom Express Travel Trailer
- Shop: CE Smith Replacement U-Bolt w/ Nuts for 3" Round Axles - 1/2" Diameter - Galvanized
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: Replacement U-Bolt Axle Mounting Hardware Kit - 3" Axles
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Proper Position of Equalizer and Shackles on Trailer Suspension
- Q&A: Why do Some Trailer Suspension Kits Have Longer Equalizer Hangers
- Q&A: Trailer Suspension Equalizer Tilted Up At one End
- Q&A: How to Prevent Leaf Springs from Hitting Trailer Frame on a Gooseneck Trailer
- Q&A: 3-Leaf Double Eye Springs That are Close to 24 Center Eye to Center Eye
- Shop: Trailer Hitch
- Search Results: leaf spring
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Video: Manufacturer Discussion - Roadmaster Comfort Ride System
- Search Results: trailer suspension parts
- Shop: Brake Controller
- Video: Ultimate Overview of the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
on Trailer Suspension Parts
Ben
6/17/2024
Thanks Jesse. I had a local reputable trailer parts store measure the eye-to-eye length of the old springs with them on the trailer (although their experience level varies depending on who is working that day). But I also read on a forum that measuring old leaf springs can over-estimate the length if they have flattened over time. The new ones are 25 1/8". I don't have the old springs anymore, but not sure they would be much help. What length would you suggest? I see 24 7/8, 24 5/8, and smaller. Is there a good way to measure without having using the old springs as a reference? Thanks again. --Ben.