Should You Add 2nd Curt Stabilizing Strap to Kuat Sherpa 2.0 Bike Rack
Question:
I recently installed the curt C11286 Class 1 1-1/4inch Trailer Hitch on my 2017 Subaru Crosstrack and just received the Kuat Sherpa 2.0 bike rack SH12B along with the Curt stabilizing strap 18050. With two bikes loaded up 37lbs 44-45inch wheelbase and 34lbs 46-47inch wheelbase the best place to hook the strap seemed to be the middle of the outer 2nd bike platform of the rack. While the strap was tight and seemed to help a little there was still some decent bouncing and swaying when go over bumps, turns and rough road. The pictures and videos of the strap seem to have it hooking on something higher up on the rack but the Kuat Shepra 2.0 doesnt have anything other than the arm holding the bike wheel. Is there a preferred method to using the strap with this bike rack? Would a second strap for either side of the outside platform be recommended?
asked by: Doug
Expert Reply:
Hi Doug,
First, thanks for the purchases, it is certainly appreciated. As for your query, the Curt Cam Buckle Stabilizing Strap # 18050 isn't really meant to completely stop bounce and sway on racks like your Kuat Sherpa 2.0 # SH12B, it's meant to take some of the stress off the hitch.
That said, I can understand if you just want added peace of mind and more stability for your very nice bike rack. You definitely don't want to put a strap around one of the arms holding the bike wheel, so what I would do is add another # 18050 to the outside platform. Two of these spread apart should remove the majority of the movement of the rack.
![Kyle S](https://images.etrailer.com/static/images/catg/people/1237_tn.jpg)
Products Referenced in This Question
Kuat Sherpa 2.0 Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount - Black
- Hitch Bike Racks
- Platform Rack
- Folding Rack
- Tilt-Away Rack
- Wheel Mount
- Bike and Hitch Lock
- 2 Bikes
- Class 1
- Class 2
- Fits 1-1/4 Inch Hitch
- Carbon Fiber Bikes
- Kuat
more information >
Product Page this Question was Asked From
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Best Bike Racks for Electric Bikes
- Q&A: Recommended Platform Bike Rack for a 1-1/4 Inch Hitch
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: 2017 Volkswagen Golf Hitch Receiver and Bike Rack Recommendations for Good Ground Clearance
- Article: How to Choose a Hitch-Mounted Bike Rack
- Q&A: Differences Between Curt, Draw-Tite, and etrailer.com Trailer Hitches for 2019 Subaru Outback Wagon
- Q&A: Trailer Hitch and Wiring for 2014 Jeep Patriot
- Q&A: Hitch Extension Availability for 2001 Ford F-350