Plug and Play Brake Controller Recommendation for a 2024 Mazda CX-50

Question

Question:

I need a brake controller for a 2024 Mazda CX50 that is plug and play with no splicing involved.

asked by: Danny J

0

Expert Reply:

Hey Danny, thanks for reaching out!

I recommend using the Curt Echo Under-Dash Bluetooth Brake Controller # C27JR which will plug into your 2024 Mazda CX-50 using the Adapter # C32FV as long as your CX-50 has the factory tow package. I really like this brake controller because you adjust your settings via an app on your phone and then the controller remembers the settings and remains up under your dash so it doesn't affect the look of your vehicle at all.

If your vehicle doesn't have the factory tow package then you'll need the kit # C27JR and # C51515 along with the wiring parts # TK85VR and # ETBC7 instead. Without the factory tow package you will need to splice in the wiring as there isn't anything ran from the factory to plug into.

expert reply by: Jon G

0

Answer 1

Hey Chuck, thanks for reaching out! I recommend going with the Curt T-Connector Vehicle Wiring Harness #C24ZV for your 2025 Mazda CX-70 because it's a simple Tee-in installation so it's much more simple than getting in behind your tail lights…

view full answer...

Answer 2

The Tekonsha Voyager Proportional Trailer Brake Controller #39510 will install in a 2002 GMC Sierra (if it is equipped with a factory 7-way) using quick-connect wiring adapter #3025-P, which plugs in under the dash as shown in the linked video at the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 7

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 12

We can definitely get you set up. For a 7-way wiring harness for your 2024 Honda Pilot trailsport I recommend the Curt T-Connector #C35ZV which will plug in to the existing tow package connector at the rear your vehicle. I do also recommend getting…

view full answer...

Plug and Play Brake Controller Recommendation for a 2024 Mazda CX-50

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching