Drive on Tire Changing Stand

Question

Question:

I am looking for a tool that you can put under the axle of a trailer and drive forward and the trailer rolls up raising the trailer to change the flat tire it is made out of aluminum

asked by: Rick

0

Expert Reply:

Yes, we do, however they are not made of aluminum! It is the TrailerLegs Tire Saver Stands for Trailers w/ Leaf Spring Suspensions item # 326-TRLLG-2. These stands lift the trailer wheels off of the ground, using the axle to support the weight of the trailer.

We also have a set available for tandem axle trailers, TrailerLegs Tire Saver Stands item # 326-TRLLG-4.

expert reply by: Jerred H

0

Answer 1

The difference between these models is the connection points for the black and gray water pipes. A hub will fit over a pipe while a spigot will fit inside of a pipe. You'll just need to choose the correct connection type for your current piping.…

view full answer...

Answer 2

The combined 8,000 pound weight capacity for the Single Axle TrailerLegs Tire Saver Stands #326-TRLLG-2 is enough to support the weight of your trailer but you will still want a set on each axle to provide proper lift on all 4 tires. Using just one…

view full answer...

Answer 3

It's going to be a good idea to get the weight off of your tires when it's stored long term. If the tires sit in the same spot for an extended period of time they tend to get flat spots which makes for a rough ride and wears them out…

view full answer...

Answer 4

If the Trailer Aid Plus system didn't quite get a bad tire off of the ground for your 2017 Coachmen Freedom Express 246RKS then the Blaylock EZ Jack and Wheel Chock #EZ-JACK will probably not work since it offers about the same amount of lift and…

view full answer...

Answer 5

The best way to change a wheel on your fifth wheel trailer is to use the Andersen Rapid Jack, part #AM3620. You will pull the vehicle up on the #AM3620 so that the other wheel is about an inch off the ground. I have attached a link to a video that…

view full answer...

Answer 6

The Andersen Rapid Jack #AM3620 is designed specifically for trailers with leaf springs and tandem axles to change tires or for single axle trailers with or without leaf springs for leveling. The only issue some people have had with their tandem…

view full answer...

Answer 7

Trailers tend not to have a suspension that travels 8 or more inches, which is the amount of lift provided by the Rapid Jack #AM3620. If the axles are far enough apart or the ground is not level it could be an issue though. That's why its tough…

view full answer...

Answer 8

Since you have a tandem axle trailer there is a simple and easy solution. I recommend using the Andersen Rapid Jack #AM3620. This will allow you to raise your axle and change your tire by driving your good wheel onto the jack. It also doubles as a…

view full answer...

Answer 9

Using the Andersen Rapid Jack #AM3620 to quickly change a tire will not damage the leaf spring on your tandem axle trailer. This has been tested for use with double axle trailers so there's really nothing to worry about because, as you noted,…

view full answer...

Answer 10

We have just what you are looking for. The Andersen Rapid Jack part #AM3620 is a wedge shaped ramp that you can roll your trailer wheel onto to fix a flat or use it upside down as a chock.

view full answer...

Answer 11

The Andersen Rapid Jack part #AM3620 and Blaylock EZ Jack and Wheel Chock part #EZ-JACK are both excellent options to help quickly and effectively change a trailer tire. I spoke with each of the respective manufacturers but neither we able to give…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Drive on Tire Changing Stand

Product Page this Question was Asked From

Continue Researching