What Size Pilot Holes are Used for Bolts that Attach the Dual Cam # RP66074 Frame Plates
Question:
What size pilot hole for the self tapping screws?
asked by: Terry L
0
Expert Reply:
If you are speaking of the screws used to fasten the dual cam frame plate, the hole size will depend on whether you have a tubular steel or C-Channel frame. If you have the tubular frame, you'd drill a 7/16 inch pilot hole, or a 17/32 inch hole if you have a C-Channel frame.
The tubular steel frame would use the self-threading bolts, and the C-Channel frame would be through-bolted. You can see this on page 6 and 7 of the instructions I've linked.
click to enlarge
expert reply by: Mike L
0
Product Page this Question was Asked From
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 12K GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Prevents Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 700 lbs
- 800 lbs
- 900 lbs
- 1000 lbs
- 1100 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- Recommended Weight Distribution System for 5300 lb Apex Nano Camper
- Will Curt Weight Distribution Shank Fit a Reese Strait-Line Weight Distribution System
- Weight Distribution System Recommendation for a Trailer Weighing 7,700 lbs
- Installing Reese Strait-Line Weight Distribution on V-Nosed Enclosed Trailer
- Weight Distribution and Sway Control Recommendation for a 30 Foot, 6,500 Pound Trailer
- Recommended Weight Distribution System for 2018 Keystone Summerland 1750RD
- Which Shank To Use Reese Strait-Line Weight Distribution Hitch RP66074 In 2-1/2" Receiver
- Will the Strait-Line Weight Distribution System Work With Gen-Y Torsion Weight Distribution Shank
- Will Reese Strait-Line Weight Distribution Bars Come Off Cams When Turning
- Availability of Weight Distribution and Sway Control for a 2-1/2 Inch Class V Trailer Hitch
- Which is Better Round Bar Weight Distribution or Trunnion Head
- Weight Distribution Recommendation for Trailer with 800 lbs Tongue Weight and 2-1/2 inch Hitch
- Can Sway Control Be Used on a Trailer that Uses a Pintle Hitch Set Up
- Excessive Trailer Sway Using Dual-Cam Sway Control with a Keystone Passport Travel Trailer
- Can Weight Distribution Be Used on 2016 Ram 1500 with Auto Level Air Suspension
- Can Weight Distribution Rated for Lower Tongue Weight than Actual Tongue Weight be Used
- Troubleshooting Trailer Sway with a 2013 Ford F-150 Towing Camper with Weight Distribution
- Can Weight Distribution Spring Bars be Pointed Up on the Trailer End and Still Work Properly
- Can a Weight Distribution System be Used on a Mercedes GL450 with Air Bag Suspension
- How to Properly Set up Weight Distribution With Air Bag Equipped 2017 Ram 2500
- How to Pick Out a Weight Distribution System for a Truck with a 6 inch Lift
- Differences Between Trailer Weight Distribution System Round Bars and Trunnion Bars
- Best Weight Distribution System for Somerset E3 Pop Up Camper
- Backing Up with Strait-Line Weight Distribution w/ Sway Control Installed
- Replacement W/D Head and Dual Cam for Reese # RP66074 Strait-Line Weight Distribution System
- Weight Distribution and Sway Control Recommendation for Trailer with up to 1,200 lbs Tongue Weight
- Recommended Weight Distribution System For Grand Design Imagine 2950RL Trailer
- Setting Up Weight Distribution with Auto-Leveling Air Bags on a GMC Yukon
- Instructions and Tools Needed to Install the Strait-Line Weight Distribution Hitch System # 66074