Bolt Hole Spacing for the etrailer Electric Trailer Brakes
Question:
Looking at the akebrk-35-sa electric brake assembly and need to know what the bolt hole spacing is for the mounting holes.My trailer is 2 and 7/8” on center. Thank you
asked by: Ray
0
Expert Reply:
Hi Ray, the bolt hole spacing for the etrailer Electric Trailer Brakes # AKEBRK-35-SA is 2-7/8" on center, so these sound like they'll work perfect for you.
expert reply by:
Bryce D
0
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
TruRyde Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- TruRyde
more information >
Continue Researching
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Q&A: Recommended Parts to Rewire an Old Trailer w/ Brakes
- Shop: Trailer Wiring 7-Way Upgrade Kit
- Q&A: How Do Trailer Clearance Lights Normally Get Replaced
- Shop: Optronics Trailer Light Kit for Trailers over 80" Wide - Submersible - 25' Wiring Harness
- Shop: LED Combination Trailer Tail Lights - Submersible - Driver and Passenger Side - 25' Wire Harness
- Shop: LED Trailer Mini Clearance and Side Marker Light with Grommet - Submersible - 1 Diode - Amber Lens
- Shop: TruRyde Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Trailer Wiring Diagrams
- Search Results: reflective tape
- Search Results: reflector
- Search Results: cotter pins
- Q&A: Inserting Wire Connections to Interior When Installing # MCL13A2B Clearance Light on Toyota Camper
- Q&A: Replacement Suspension Parts & Lift For 2012 Skyline Koala 27CDS With 3,500 lb Axles
- Q&A: Replacement Brakes and Hub and Drum Assemblies that Use L68149 and L44649 Bearings
- Q&A: Utility Trailer Upgrades: Toolbox, LED Taillights, and Spare Tire Holder
- Video: Trailer Wiring 7-Way Upgrade Kit Feature Review
- Video: Checking Out the Optronics Trailer Light Kit for Trailers over 80" Wide
- Video: All You Need to Know About the Optronics LED Clearance or Side Marker Light
- Video: Identification Light Bar for Trailers over 80" Wide Review
- Video: Peterson LED Tail Light Kit for Trailers Over 80" Wide: The Breakdown
- Video: etrailer Easy Grease Trailer Hub and Drum Assembly Installation - 2019 Grand Design Reflection 150 F
- Video: Feature Breakdown: TruRyde Electric Trailer Brakes
- Search Results: trailer brake controller
- Search Results: high pressure valve stem
- Search Results: trailer tires
Ray
8/16/2024
Thanks for the reply.