Question:
what size socket to tighten bolts for hidden hitch 2014 ACURA MDX Thanks
asked by: Kelly W
Expert Reply:
According to the installation instructions, which you can see by clicking the provided link, a 22 mm socket is needed for the M14 x 1.5 bolts used to install the Draw-Tite # 75225 on a 2014 Acura MDX. The bolts should be tightened according to the torque rating mentioned in the instructions.
If you'll be using the hitch for towing, you might also need the following:
Trailer wiring harness with 4-pole trailer connector, part # C56192. (A relay might be needed from your Acura dealer to activate the tow package)
Ball mount, part # 2923
Pin and clip # PC3 and/or hitch lock, # e98882
1-7/8 inch trailer ball, # 19260
2 inch trailer ball, # 63845
I've linked you to a copy of the installation instructions and an install video you might find helpful.
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
