Recommended 2" Trailer Hitch For A 2022 Kia Telluride

Question:

Hello. Looking for recommendations for a 2-in hitch for a 2022 Kia telluride please. Mostly for bike rack, but may end up pulling a camper in the future Im going to install it myself but Im experienced in doing so.

asked by: Corey W

Expert Reply:

Hello Corey, thanks for reaching out. For your 2022 Kia Telluride, I recommend the etrailer Class 3 Hitch # e45ZR. This is a 5,000 lb rated 750 tongue weight hitch with a 2" receiver. It has a durable matte back powder coating, although most of the hitch will be completely hidden behind the bumper of your Telluride.

Installation is not terribly difficult. You will need to loosen/remove a plastic underbody panel then trim it to reattach. You will also want to temporarily lower the spare tire to free up room for the hitch and room to work. The exhaust will need to be lowered and removed from its hangers temporarily as well. If you are familiar with working on cars, this should take you maybe 60 to 90 minutes to complete.

We have a video showing the full installation on a 2022 Telluride. I have provided a link to the video for you below. Give it a watch and I bet it will save you some time.

If you plan to tow a trailer you will also need a wiring harness. If your Telluride has the OEM tow package, you can use the Curt # C68JR which plugs in to the factory connector behind the driver side rear bumper. If you do not have the factory tow package you will need the Curt # C59236 which is a hardwired 4-flat connector.

expert reply by: Jesse M