Are Replacement Wheel Trays For Yakima TwoTimer/FourTimer Right Even if They Don't Have Red Buckle

Question

Question:

I need 2 replacement wheel cups for a Yakima Two/Four Timer parts 8880796 and 8880797. They are shown with gray clips but the button on mine is red but it looks like the same part. Are they?

asked by: Carey R

0

Expert Reply:

Hey Carey,

Yes, the correct replacement wheel trays for your Yakima TwoTimer or FourTimer are the exact part numbers you mentioned. Per Yakima, they replaced the red buckle with a grey buckle back in 2017, but they are the same part:

- Replacement "A" Wheel Tray Assembly # 8880796

- Replacement "B" Wheel Tray Assembly # 8880797

expert reply by: Kyle S

0

Answer 1

Unfortunately the tongue of your Yakima Two-Timer is different from your Yakima Hold-Up 2, so they cannot be interchanged. I have included pictures below that show the difference. Your best option is two get the Yakima HoldUp EVO bike rack, part…

view full answer...

Answer 2

I do have an option for you but I cannot confirm the SilentACT Anti-Rattle Trailer Hitch Accessories Lock part #SHP2082 will work with the Yakima HoldUp 2 Bike Rack like part #Y02443. That said, even if it were to fit it would likely not reduce…

view full answer...

Answer 3

We have the wheel mounting hardware #8880520 for the Yakima TwoTimer. The wheel tray has been replaced with #8880796 which is what you'd need.

view full answer...

Answer 4

It sounds like you are looking for the Replacement "B" Wheel Tray Assembly for Yakima TwoTimer and FourTimer Bike Racks #8880797, for your Yakima TwoTimer Bike Rack. This product replaces a wheel tray assembly "B" with grey wheel…

view full answer...

Answer 5

If it's the buckle assembly you'd have to replace the entire cradle like with the part #8880797 or the #8880796 depending on which cradle it is. If it was actually the strap the part number you need is the #Y8880229.

view full answer...

Answer 6

I'd be happy to help out! The way to choose correctly between the Replacement "A" #8880796 and "B" #8880797 trays for your Yakima FourTimer is how many bumps you'll find at the base of the wheel cup "(or tray). Our…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Thanks for reaching out, Roy! The term "best" can be a little subjective since everyone has their own experiences and needs/wants, but in regards to which bike rack has the best features it is the Thule Epos Bike Rack #TH99XE hands-down…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 12

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Are Replacement Wheel Trays For Yakima TwoTimer/FourTimer Right Even if They Don't Have Red Buckle

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching