Recommended Replacement Entry Door Latch for a 1995 Jayco 1207 Pop Up

Question

Question:

I have 1995 Jayco 1207 popup camper, and the entrance door latch isn’t working anymore. What type of latch could I use as a replacement? I’m not seeing the Decker 1042 door latch currently installed.

asked by: Mark C

0

Expert Reply:

Hey Mark, I did some digging and was able to find your Decker 1042 door latch, and it looks like it has a 2 7/8" x 3 3/4" cutout. While we don't have a direct replacement, we do have the Bauer Products Camper Door Lock # BA54FR, which has a 2 3/4" x 3 3/4" cutout.

This latch is 1/8" smaller than the original, will fit doors that are 1 1/4" to 1 1/2" thick, and can be keyed alike to match other Buyers Products RV locks.

expert reply by: Bryce D

0

Mark

8/29/2024

Hello thanks for the info, this latch comes with keys already correct? Not sure what you are referring to when you say can be "keyed alike". Are you saying that you can have the key's match other latch like this one? If this doesn't work am i able to return this latch?

Reply

Bryce D.

8/29/2024

@Mark Hey Mark, yes the Bauer # BA54FR does come with keys, and they can be cut to match your other Bauer locks so aren't carrying around a bunch of different keys. For returns, within 60 days of receipt of your shipment, you may return any new or unused item for a full product refund.

Reply

Answer 1

I recommend the Bauer Products Camper Door Lock - Black #BA54FR. I feel they are a good quality brand and easy to operate. You can get them keyed alike by using the drop down menu before you add them to your cart. This particular version requires a…

view full answer...

Answer 2

I have a solution for you. I recommend the Valterra Keyed Entry Door Knob w/ Interior Lever for RVs - Stainless Steel #L32CS000. This will be a good general replacement. Easy install that fits doors with 2-3/8" to 2-3/4" from center of face…

view full answer...

Answer 3

Hey Mark, I did some digging and was able to find your Decker 1042 door latch, and it looks like it has a 2 7/8" x 3 3/4" cutout. While we don't have a direct replacement, we do have the Bauer Products Camper Door Lock #BA54FR, which…

view full answer...

Answer 4

Hey Kris, you'll want to measure the length from the very front to the very back of the fender as well as the overall width and height with height being the least important. For example, the part #HP52VR has the dimensions of 9" Wide x…

view full answer...

Answer 5

The B&W Continuum Weight Distribution System part #BW78FR requires at least 24" of space on the frame directly behind the coupler and along the side a few inches back from there. This works with most trailers but for some it will not and,…

view full answer...

Answer 6

To select the correct B&W Continuum Weight Distribution System for your needs you will first need to determine if you have a standard coupler(mounts on top of trailer frame rails) or an underslung coupler(mounts on the bottom of the trailer frame…

view full answer...

Answer 7

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…

view full answer...

Answer 8

Hey Karl, for your 2023 Brinkley Z2900 I recommend going with the Adco Olefin HD RV Cover for 5th Wheel Toy Haulers up to 34' Long #AD49ZR. This cover will fit 5th wheels that are up to 34' long, 9' wide, and 10'6" tall so it…

view full answer...

Recommended Replacement Entry Door Latch for a 1995 Jayco 1207 Pop Up

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching