Replacement long T-Bolt Kit for the Yakima Timberline Towers

Question

Question:

Do you know how I can get a long replacement bolt for my Yakima TimberLine Towers? I had one break on me when I was tightening it. Its an allen wrench bolt.

asked by: Brandon M

0

Expert Reply:

Brandon, it looks like the long Allen bolt you're looking for for the TimberLine Towers for Yakima Crossbars # Y33TR is only offered as part of the Replacement Rubber Strap Kit for Yakima TimberLine Towers # 8880820.

expert reply by: Bryce D

0

Brandon

9/3/2024

Thanks for your reply. Do I see correctly that if I try to buy the "Replacement Rubber Strap Kit for Yakima TimberLine Towers " from you it may take until Jan. 4th, 2025?

Reply

Bryce D.

9/4/2024

@Brandon Yikes yeah that's what it looks like right now (9/4/24). It looks like these are out of stock on Yakima's end which is why it's taking so long.

Reply

Answer 1

The long screw of the Timberline strap needs to thread into a barrel nut that's at the bottom of the strap. So you'll need to see if you can rotate the barrel nut or just move strap to the point the threads of the barrel nut line up with the…

view full answer...

Answer 2

Basically you are going to need to remove the long Allen bolt I pointed out in the attached picture which will allow the strap to release. From there you'll just need to slide the barrel nut out of the metal end of the strap so that you can pull…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hello Kevin, thanks for reaching out. Yakima does confirm the Timberline towers to fit the factory raised rails on the 2025 Honda Pilot. Sadly, they do not offer a direct fit for the LockNLoad Platform so your best option would be to go with a roof…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

The Malone AirFlow2 Roof Rack #MAL84AR you were looking at will fit your 2024 Subaru Forester Wilderness edition. Our fit guide can be a little confusing since these particular crossbars say it fits all models, excluding Wilderness and Wilderness…

view full answer...

Answer 9

Hey James, yes the Thule TracRac CapRac part #TH29200XT will work for a roof rack that fits the top channels that are on your cap and is compatible with the Thule Hullavator kayak carrier part #TH898 as it can attach to the top channels of the load…

view full answer...

Answer 10

Hey Dominick, Yes, we offer the 58" long Malone AirFlow2 Roof Rack in black with Item #MAL84AR. If you need anything else just let me know and I'd be happy to help.

view full answer...

Replacement long T-Bolt Kit for the Yakima Timberline Towers

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching