Will Yakima TimberLine Towers And LockNLoad Platform Fit 2025 Honda Pilot Trailsport?

Question

Question:

Hi, question about Yakima. Can I pair the timberline towers, adaptors and locknload on the new ‘25 honda pilot trailsport? I seem to be having trouble confirming.. thanks!

asked by: Kevin C

0

Expert Reply:

Hello Kevin, thanks for reaching out. Yakima does confirm the Timberline towers to fit the factory raised rails on the 2025 Honda Pilot. Sadly, they do not offer a direct fit for the LockNLoad Platform so your best option would be to go with a roof rack with crossbars like the Yakima TimberLine Roof Rack for Raised Rails # Y42GD which comes with 60" black aero crossbars. Then use the clamp-on version of the LockNLoad, part # Y05045-39.

expert reply by: Jesse M

0

Kevin C.

12/1/2024

Thanks. Will the lock n load attach to any regular cross bars then? Any advantage to going with Yakima specifically?

Reply

Jesse M.

12/2/2024

@KevinC Yes, the clamp-on LockNLoad Platform # Y05045-39 will attach to round, square, aero, elliptical, and most factory crossbars. There are other platforms out there that are comparable but in my experience the Yakima are easier to assemble, more user friendly and more durable than other brands.

Reply

Answer 1

Hello Kevin, thanks for reaching out. Yakima does confirm the Timberline towers to fit the factory raised rails on the 2025 Honda Pilot. Sadly, they do not offer a direct fit for the LockNLoad Platform so your best option would be to go with a roof…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The 71" Rhino-Rack Vortex Crossbars for Retrax XR Tonneau Covers item #RRVA180B-RRRLT600 are the correct set for your 2022 Ram 3500. These are made for full size trucks and fit in the rails of the Retrax PRO XR. These crossbars are exactly…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 11

Hey Dan, The info you provided does tell us a bit about the axle but isn't enough to look up what components go with with it. With it being a 3,500lb axle it's probably a generic 3,500lb kit for the bearings and seals but I'd hate to not…

view full answer...

Answer 12

Hello Sean, for your 2024 F150 you can indeed use the etrailer Invisible Base Plate Kit - Removable Arms #e86YR. This is compatible with all etrailer and demco tow bars, and an adapter allows it to be compatible with others. I recommend sticking to…

view full answer...

Will Yakima TimberLine Towers And LockNLoad Platform Fit 2025 Honda Pilot Trailsport?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching