Compressed and Uncompressed Length for the Roadmaster Replacement Shock Absorber

Question

Question:

Im looking for specs on some shocks. Item rm-204000-00 Need too know extended and compressed length Eye to eye. Thank you

asked by: Andy H

0

Expert Reply:

Andy, the Shock Absorber for Roadmaster Comfort Ride Trailer Suspension System # RM-204000-00 measures 11-1/2" long eye to eye compressed, 17-1/2" long eye to eye extended, and the eyelet holes are 12mm diameter.

expert reply by: Bryce D

0

Extneded Length and Eyelet Hole Diameter
(click to enlarge)

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

Andy, the Shock Absorber for Roadmaster Comfort Ride Trailer Suspension System #RM-204000-00 measures 11-1/2" long eye to eye compressed, 17-1/2" long eye to eye extended, and the eyelet holes are 12mm diameter.

view full answer...

Answer 3

Hi Dennis; you aren't going to find information on the static load listed from the roof rack manufacturers. Our general guidelines for tents like the #Y79XR are that the roof rack must have a minimum load capacity of 165 lbs which this rack does…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hi Kipp; the Blue Ox SwayPro Weight Distribution w/ Sway Control for 2-1/2" Hitch #BLU54TR will work well with this setup. The tongue weight range for this system is 1,000-1,500 lbs. With batteries and propane added to the trailer tongue you…

view full answer...

Answer 6

Hey Bob, I can assure you that the Thule WingBar Evo Roof Rack for Naked Roofs #TH48KG will also work with your F-250. For a black version, you can use the Thule WingBar Evo Roof Rack for Naked Roofs #TH32KG with the Evo Clamp Feet for Thule…

view full answer...

Answer 7

I am sorry Ira but it will not. The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY48GR is currently the only replacement available for the Turning Point pin box. Unfortunately, there is not a normal king pin pin box that will…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hey Jimmy, thanks for reaching out! The correct TorkLift Tie-Down Kit for your 2024 Ford F-350 is the Part #TL87DR. The Part #TL63PR you asked about is for a standard/short bed (6-3/4').

view full answer...

Answer 10

I highly recommend using the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F95FV for hauling and towing with your 2024 Ford F-250 Super Duty. This kit offers up to 7,500 lbs of support so you'll get the most out of a suspension…

view full answer...

Answer 11

Hi Rich; as long as those welded brackets aren't blocking the holes for the bolts to run through you can install the Curt Custom Fifth Wheel Bracket Kit for Ford #C99BR on your 2020 F-250. Take a look at the instructions below and compare them to…

view full answer...

Answer 12

Hey Phil! Thanks for getting back to me with those measurements! We have a leaf spring that is an exact replacement but I am guessing it's the pricey one you referenced. It is the 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles - 25-1/4"…

view full answer...

Compressed and Uncompressed Length for the Roadmaster Replacement Shock Absorber

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching