bing tracking image
Q & A Icon

Will the Titan Disc Brake Kit and BrakeRite Fit a Lance trailer with Dexter Axle

Question:

I have a 2015 Lance trailer model 1995. Would this kit work on the Dexter axles? I think the axle is a #10l

0

Expert Reply:

From the information that you have provided so far, the Titan Disc Brake Kit and BrakeRite Actuator, # T4843800, may fit on your Lance Trailer, however, we will need to know the inner and outer bearing and grease seal part numbers or inner diameters.

The part numbers should be stamped into the metal of the bearings and the rubber of the seal. If you are unable to locate those part numbers, then you can take a few measurements on the spindle using a precise measuring tool like a dial caliper. The bearings in this kit are # L68149 inner and # L44649 outer and the grease seal is # RG06-050.

I have attached a photo showing where the part numbers should be located on the bearings and seal. The photo also shows where to measure on the spindle for the inner diameter of the grease seal, inner and outer bearing where the part numbers should be located on the bearings and seal.

If the part numbers or measurements for your inner and outer bearings and grease seal do not match up with the bearings and seals offered with this kit, then let me know so we can piece together a kit that will work for you.

I have also attached an article on adding electric over hydraulic brakes to a trailer for you to check out.

If you were also in the market for a brake controller, then I would recommend the Tekonsha P-3 Brake Controller, # 90195. This is one of our most popular brake controllers and is easy to set up and use. I have attached installation instructions and an installation video of this brake controller for you to check out as well.

click to enlarge
expert reply by:
0
Jameson C

Products Referenced in This Question



Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Similar Expert Q&A Pages