Dimensions of the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR2KHDS03  

We have exactly what you are looking for. Check out the dimensional diagram that I have attached.

I attached a diagram that has all of the relevant dimensions of the #ASR2KHDS03 that you referenced. From the hub face to the trailer frame this setup will give you 8-1/2 inches of clearance for your trailer wheels and tires. (see dimension K on…

After installing replacement brakes such as the Dexter Nev-R-Adjust Electric Trailer Brake Kit, #23-468-469, proper adjustment is needed for that initial setting. If your brakes are engaging but not enough to apply ample friction for stopping then…

We do offer 60-inch replacement trailer axles from Dexter and both can be seen on the link provided. Note that both of these are rated for 2000-lbs. The 5-on-5-1/2-inch hub you referenced, part #84555UC1, is intended for 3500-lb axles. The most…

The 3500-lb Timbren axle-less suspension kits #ASR3500S06 (regular tires) and #ASR35HDS01 (off-road tires) differ in that the kit for wider off-road tires provides a 2-inch greater distance from the mounting point on the trailer frame to the hub…

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

The adjustment wheel that you are using to tighten the brakes just needs to be turned the other way. The adjustment wheel just pushes out the spread of the shoes or takes them back in if turned the other way. Nev-R-Adjust brakes like #23-459 work the…

A 235/75R15 size tire will mount to a 15 inch wheel that features a width range of 6 to 8.50 inches. With this in mind, the Dexstar Steel Mini Mod Trailer Wheel #AM20545 that you referenced should work nicely with your off-road tires, as it features…

I attached a picture that I took from the instructions that shows where the 2x2 crossmember attaches on the Timbren Silent Ride Suspension for Single Axle Trailers #TSR3500S05.

I went out to the warehouse to measure the outside diameter of the center of the hub #84546UC3. I used a set of digital dial calipers to take the measurement and came up with 2.6 inches in diameter at the widest point. The pilot hole on your trailer…

I attached a picture that shows all of the dimensions of the Timbren Axle-Less Suspension System, #ASR3500S05 that you are interested in. Since I don't know much about your setup the best recommendation I can make would be for you to check out…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.