5 on 5 inch Hub Recommend for Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR2KHDS03  

Yes, we have just what is needed for your 2022 Jeep Gladiator. I recommend the Tekonsha Prodigy P3 Trailer Brake Controller, #90195 and use the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Jeep, #3073-P. This adapter plugs into the…

The Timbren Axle Less kits like the part #ASR5200S01 would be a great upgrade to increase your trailer's axle capacity. Otherwise you could go with a standard axle or another torsion axle from Dexter with increased capacity. If you wanted to go…

We have a large selection of A-Frame couplers like what would be on your older Winnebago travel trailer. You can certainly remove your weld-on coupler and replace it with a bolt-on unit, as long as the new coupler's capacity is correct for your…

Here is a list of the Timbren Axle-Less Trailer Suspensions which have the #84 size spindle with a 4 bolt brake flange. 3,500LB Systems -No Drop #ASR3500S05 -4" Lift #ASR3500S06 -4" Drop #ASR3500S04 2,000LB Systems -No Drop #ASR2KHDS01…

To convert your offroad trailer to the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/ Brake Flange - 5,200 lbs #TASR5200S03 you will either use a crossbrace for your trailer frame at the axle location or you will add a 2 inch…

Hello Nathan. I do have a good option for you, but a vast majority of the landing gear sets we offer are rated from 10K-12K. We offer one set that is rated higher, the etrailer Square Jacks #TJD2SP-25100 and #TJD-25100. They are rated for 25,000 lbs…

In regards to the Timbren Axle-Less Trailer Suspension Systems, you'd have to go with the 2,200 lb model part #ASR1THDS01 in order to add brakes. For this, you'd need to use the Electric Trailer Brake Kit part #AKEBRK-35-SA and Trailer Hub…

Since you're wanting to use wheel studs on your trailer that has wheel lugs, the only way you're going to be able to use studs, is to replace your hubs that already have wheel studs mounted in them like the: - Trailer Idler Hub Assembly for…

Yes, the Trailer Hub part #AKIHUB-655-35-K will fit a 3,500 lb Dexter axle. This hub has a 6 on 5-1/2 inch bolt pattern.

When it comes to tire size and clearance, you want 3" on the top for suspension travel and 1-2" of clearance from the side of the tire to the closest part of the trailer. Based on the dimensions of the #ASR2KHDS03 it looks like the distance…