How to Pick out a Replacement Seal for a Trailer Hub
Question:
Hi, When I measure the outside diameter of the grease seal it is slightly over two inches. The dimension given for the replacement seal is slightly under two inches. Am I missing something?? Thank you,
asked by: Gary
0
Expert Reply:
You will need to get the inner and outer dimensions of your seal or the number off of it to pick out the correct seal. If the seal of the Bearing Kit part # DL21792 does not match what you have then I would not recommend it for you. You may find that your bearings and seals do not match one of the bearing kits we offer. In that situation you will just need to piece together what you need.
I attached a link to a page that has all of the seals we offer. Select your inner and outer diameter from the facets on the left of the screen.
click to enlarge
expert reply by: Jameson C
0
Product Page this Question was Asked From
Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Looking For Replacement Seals For An Old Utility Trailer That Has 7205E Bearings
- Correct Bearing/Race and Castle Nut Kit for 1 Trailer Spindle
- Where to Find Bearing Part Numbers for EZ Loader Trailer
- Does the # 34823 Seal in Bearing Kit # DL21792 Match a # 7781 S
- How to Determine Bearings and Seals that are Needed for a Long Chih Trailer with 12 Inch Wheels
- Availability of USA Made Bearings for 2,000 lb Trailer
- Replacement Bearing Kit for Trailer Hub with L44643 Bearing
- What Size are the Bearings, Races, and Seal in the Bearing Kit # DL21792
- Wheel Bearings Needed for 1990 Coleman Newport Popup Camper
- Should There be a Space Between the Bearing and Seal on a Hub
- How to Determine Which Spindle Washer To Use With DL21792 Bearing Kit
- Replacement Bearings for 1986 Long Chih Trailer with 1000 lb Axle
- Dimensions Needed To Replace Bearings And Seals On Trailer
- Replacement Bearing Kit With Bearings, Races, And Seals For 4 Lug Trailer Axle Hubs
- Axle Capacity Rating For The L44643 Bearing
- Bearing Kit for Boat Trailer with 1-1/16 Inch Diameter Straight Spindle
- How to Determine the Correct Replacement Wheel Bearings for a 1990 Coleman Pop Up Camper
- How To Determine Bearings and Seals For Older Long Chih Trailer
- How to Determine Replacement Bearings for a 2005 Fleetwood Yuma Pop Up Camper
- Replacement Trailer Hub Grease Seal for L44643 Inner and Outer Bearings
- Tips on How to Pack Trailer Bearings with Grease
- Repacking Bearings on a 2004 Fleetwood Yuma Pop-Up
- How to Pick Out Spindle Washer for Trailer Hub
- Needs Grease Seals of Approximately 1.22-Inch Inner Diameter for Home-Made Motorcycle Trailer
- Replacement Seal Needed for a Harbor Freight Haul-Master With Bearing 30205
- How to Determine Correct Bearing Kit for 4X8 Trailer with 1 Inch Spindles
- Grease Seals for Hub on Antique 1950's Trailer Using Military Surplus Axle
- Does Grease Seal in Trailer Hub Need to Press Against Bearings in Hub