Would an ATV Wheel Bolt Up to a Timbren Axle-Less Trailer Suspension System
Question:
Is it possible to use ATV wheels with this system? I am looking at 12inch wheels with a 5/4.5inch hole pattern and a 2+5 off set.
asked by: Tom
0
Expert Reply:
An ATV wheel with a 5 on 4-1/2 inch bolt pattern would bolt right up to the Timbren Axle-Less Trailer Suspension # A12WS545 that you referenced has the same bolt pattern. Your offset means the wheel would be further away from the trailer so it should clear just fine.
On a trailer we strongly recommend the use of trailer wheels and tires since they are specifically designed for use on trailer and an ATV wheel is not rated for the vertical load that trailers will see.
I would recommend the Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel # AM30660. This is a 12 inch wheel and tire with the same bolt pattern as you need that would be rated for use on a trailer
expert reply by: Jameson C
0
Products Referenced in This Question
Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 4.80-12
- 12 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Video/Article/FAQ this Question was Asked From
Article or VideoFeatured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Timbren Axle-Less Suspension for 10,000 Pound Mobile Hydraulic Lift
- Wheel Recommendation for Timbren Axle-Less Trailer Suspension System # A12WS545
- Can I Use Timbren Axle-Less Trailer Suspension System with Hubs on my Boat Trailer
- Can Timbren Axle-Less Trailer Suspension Rubber Springs Be Replaced to Increase Weight Rating
- Dimensions of Timbren Axle-Less Trailer Suspension # A12WS545 For Utility and Motorcycle Trailer
- How Much Clearance Is Needed For Tires When Installing Timbren Axle-Less System Under Trailer
- Replacement Grease Seal for the Timbren Axle Less System part # A12WS545
- Available Weight Capacities for Timbren Axle-Less Trailer Suspension Kits
- Is The Timbren Axle-Less Suspension System Equipped For Use On Highway
- Comparing The Timbren Axle-Less Trailer Suspension System To The FlexiRide Half Torsion Axle System
- Timbren Axle-Less Suspension System for a Tear Drop Trailer Build
- Timbren Axle-Less System Recommendation for a Tear Style Trailer Towing 500 lbs Max
- Can Built-In Camber be Adjusted on Timbren Axle-Less Trailer Suspension System with Hubs
- Can Metric Studs Be Substituted In Timbren Axle-Less Trailer Suspension System With Hubs
- How Much Does the Axleless Timbren Suspension System A12WS545 Compress When Loaded
- Is There a Timbren Axle Less Kit Setup that Fits Jeep Wheel Bolt Pattern 5 on 5 inch
- Timbren Axle Less Kit with Hubs Recommendation for Small Trailer Towed by Chevy Tracker
- Replacement Hub Assembly for Timbren Axle-Less System # A12WS545
- Recommended Axle for a Trailer and Cargo Weighing 800 lbs
- Timbren Axle Less System for 2k Axle Replacement with 5 on 4-1/2 inch Hubs and Off Road Config
- Recommended Axle-Less System and Wheel/Tire Combo for a Light Boat Trailer
- Would Wheel with Backspacing 3-3/4 inches Clear Frame Installed with Timbren Axle Less Kit A12WS545
- Would Taskmaster 4.80-12 Tire White Mod Wheel Fit on a Timbren Axle-Less Trailer Suspension System
- Timbren Axle-Less Trailer Suspension and Hubs with 5 on 5 Bolt Pattern
- Will a Kenda 215/60-8 Bias Trailer Tire and Wheel Fit the Timbren Axle-Less System part # A12WS545
- Wall Thickness Recommendation for Square Tubing Support For Timbren Axle-Less Suspension
- Timbren Axle-Less Trailer Suspension for Utility Trailer
- Does 1,200 lb Timbren Axle Less System Require Frame Cross Beam
- Compatibility of Timbren Axle-Less Suspension on Boat Trailer