bing tracking image
Q & A Icon

Why Do Hitch Extenders Reduce Hitch Capacity but Long Ball Mounts Do Not


Hi, I have a general question about how these items affect hitch capacity. I have been looking at a lot of your expert answers and am confused on the theory. Pretty much everywhere in your technical help I see that a hitch extension will reduce hitch capacity by 50. The reason stated is because the hitch extender moves the load out farther from your vehicle, applying more leverage to your hitch. I understand that theory even though I imagine the 50 figure is just a safe level for liability. I would think there would be a differnet percentage for each length of extension. The problem I have is that it seem like a longer shank or ball mount would do exactly the same thing but I dont see that mentioned. Each hitch has a maximum hitch weight spec. and a maximum trailer weight spec. At what ball distance from hitch is this specd at? There must be some standard because, like you say, the further the load is moved out from the hitch, the more leverage there is. One last confusing point was this comment, Using an extender in a 2-1/2 inch receiver does not decrease the tongue weight capacity of the hitch like it would with 2 inch hitches. Why should that matter? Shouldnt it still be 50? Thanks for taking the time to explain this.


Expert Reply:

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will increase the impact of the tongue weight since there will be play between the hitch and hitch accessory. Think of how a jack hammer works to help visualize what I mean.

I wish there was an exact figure as to how much the tongue weight gets reduced by based on the distance away from the hitch pin hole, but none of the manufacturers are willing to get that specific. 50 percent is a conservative number that is easy for people to remember and adhere to and won't get them in trouble.

Longer ball mounts typically have lower capacities than standard ball mounts, so that is generally how they reflect the lower capacity from the increased leverage.

2-1/2 inch hitches also follow a similar train of thought. While the rule doesn't necessarily apply to the hitch it does apply to the extension pieces. If you look at extender like part # RP45292 you will see it has a much lower capacity than a 2-1/2 inch hitch and based on the differing length its used at the capacity changes as well.

expert reply by:
Jameson C

Product Page this Question was Asked From

Follow up Questions


Blue ox has a 2” extender at 6” long. And is rated at 10,000 lbs. would this reduce my tongue weight. Also if I get a adjustable hitch that has a little longer shank 6” the end going into the hitch would it reduce tongue weight. Thanks

Etrailer Expert
Reply from Jacob H.

If you use a hitch extender, it will decrease the tongue weight of your hitch by 50%. If your hitch has max tow capacity of more than 10,000 lbs then using the hitch extender will lower your towing capacity to 10,000 lbs. As far as the ball mount goes, it is going to be based off what the max tongue weight capacity of the ball mount is and if it is higher than that of your hitch it will not decrease your tongue capacity.

Reply from Stephen F.

@JacobH if not more i have seen they on some truck and sure are not the right way to do it

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>