bing tracking image
Q & A Icon

Replacement 4-Way Flat Trailer End Connector for Current Connector with 5 Wires

Question:

I have a 4 plug flat trailer end connecter with 5 wires coming out of it. The vehicle is a standard 4 plug flat. I need to replace the trailer end. Do you have the product?

0

Expert Reply:

I recommend replacing your current connector with the Hopkins Endurance 4-Way Flat Trailer Connector, # HM48110. You will just need to cut off the connector on your wishbone style wiring harness and replace it with the # HM48110. A wishbone style harness contains 5 wires because it uses two tail light wires from the connector for each side of the trailer. In this case you will just need to connect the brown wire to both taillight wires, the yellow wire to the left turn/brake wire, the green wire to the right turn/brake wire, and the white to the ground. I recommend using butt connectors like the Deka Heat Shrink, # DW05745-5, to make your connections.

expert reply by:
0

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>