Will Fulton 1200 Pound Swivel Trailer Jack Fit a 2004 Triton 186 PD

Question:

I have a 2004 Triton 186 PD. I need to replace the trailer jack due to the wheel leaning a little. I measured the weld bracket from the top, and the center is 21/2 inches. Is this correct ?

asked by: Joe B

Expert Reply:

The mounting bracket that gets welded to the frame for Fulton swivel jack # FTJ120W0301 is approximately 2-1/4 inches from the top of the bracket to the center of the pilot hole in the middle of the bracket.

It could still potentially work for you if the pilot hole on the bracket you have now is 2-1/4 inches in diameter. The center hole on the jack is 2-1/2 inches. The holes that the jack pin goes through are 3 inches apart on center (up and down and side to side).

expert reply by: Michael H