Can Drum Brakes on 5th Wheel Trailer Be Converted to Electric Disc Brakes
Question:
can I convert the drum brakes on my 5th wheel dexter axles to electric disc brakes? Ive found kits but it takes a surge system and will not work on a 5th wheel. Thank You
asked by: John H
Expert Reply:
I do not know of any fully electric disc brake systems for 5th wheel trailers.
There are electric-over-hydraulic (EOH) brake actuators that take in an electric brake signal from a trailer brake controller, such as the Tekonsha Prodigy P2 # 90885, and convert this signal to hydraulic pressure to operate disc (or drum) brakes. Such hybrid systems do require an EOH actuator, a trailer brake controller as well as all the hydraulic lines, breakaway kit and the disc brake assemblies themselves. As you note such systems are not intended for 5th wheels.
You might want to contact the manufacturer of your 5th wheel before considering so significant a modification. You may also want to take a look at the linked articles on trailer brakes and the steps and parts needed for various conversions.
Products Referenced in This Question
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 5200 lbs
- 6000 lbs
- Brake Assembly
- 6 on 5-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Parts Needed To Convert From Electric Drum Brakes To Hydraulic Disc Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Are The Mounting Brackets On The DeeMaxx Disc Brake Kit # DE72FR Also Stainless Steel?
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Parts Needed to Convert Tandem Trailer with 5,200 lb Axles to Disc Electric Over Hydraulic
- Q&A: How to Determine Correct Torque Setting for New Disc Brake Setup on Boat Trailer
- Q&A: What Size Bearing Buddy for Kodiak K2HR526D Disc Brake Kit
- Q&A: Can I Use the Kodiak Rotor KR12D to Replace a Tie Down Engineering TDE46247 Rotor
- Q&A: Replacement Brake Kit and Hubs/Rotors For a Continental Trailer With 5,880LB Trailer Axles
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch