Hands-On with the Americana Rubber, Snap-In Valve Stem Video

Hey Damron, so we don't have ability to mount tires here but a 225/75R15 would fit and work great on the Aluminum AM03 trailer wheel part #AM88NR that you referenced like the part #TTWTRTM2257515D. You'd just need to find someone to mount…

Hey Jason, All of the wheels for your Jetski Trailer in the 8" size are going to be the same plain wheel you currently have. As long as all of your wheels are still usable, the easiest thing to do is to stick with them. If you have enough room…

For a metal valve stem that fits your Aluminum Jaguar Trailer Wheel you can use the Americana Metal, Bolt-In Valve Stem - 1-1/4" Long #AM20906. I have attached a picture showing what it will look like once installed on your wheels.

The tire included with the Kenda KR25 Radial Trailer Tire with 12" Aluminum HWT Wheel #AM31208HWT is the Kenda Karrier S-Trail ST145/R12 #AM10130 which has a speed rating of 65 mph.

Looks like you're running the Kenda KR25 Radial Trailer Tire with 12" Aluminum HWT Wheel #AM31208HWT - thanks for the photo! The tire is rated for 1,220 lbs at 65 psi so I can definitely see why you're experiencing bounce. You can…

We recommend that all trailer tires be inflated to the max psi stated on the sidewall of the tire. If the tire is under inflated, the weight capacity is lowered to an unknown amount for that tire. Although running lower air pressures can improve the…

I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…

For your 20x10-8 size tire, you can use an 8 inch x 7 inch wheel like the Americana #AM20021 if you have a 4 on 4 inch bolt pattern or #AM20026 if you have a 5 on 4-1/2 inch bolt pattern. Both wheels feature a nice white powder coat to resist…

The Kenda K371 Bias Trailer Tire #AM10002 does not require a tube. It's also not recommended to use a tube in a tube-less tire. Due to how tube-less tires are constructed it will cause additional heat buildup which is the number one reason tires…

Yes, the Kenda part #AM1002 will fit as a replace the 4.80-4.00-8 tire size you have on your log splitter.

Though we don't carry that exact part, we do have a strut with the same dimensions that is likely to work. Based on my research the gas strut 654150 is 26.46" when extended, has two metal ends and is 120 lbs of force. The strut we carry…