bing tracking image

B and W Pintle Hitch - Pintle Mounting Plate - BWPMHD14001 Review

content loading

Customers compare BWPMHD14001 to these similar products




Products Featured in this Video



Review of B and W Ball Mounts BWPMHD14001


Today we'll be reviewing part number BWPMHD14001. This is the B&W Pintle Hook Mounting Plate for two inch hitches. It's a six hole design rated at 16,000 pounds. The hitch mounted adapter plate is going to provide a mounting point for your pintle hook which is sold separately. The six holes provide two different mounting points that lets you customize the height of the pintle. The mounting holes are separated from center of one hole to the center of the other by an inch and three quarters of an inch.

You can use this in either of the drop or rise position. It's made from a sturdy steel construction also providing a nice high gloss black powder coat finish that's going to help stand up against corrosion. This does require a hitch pin and clip or a hitch lock which is sold separately and you can refer to the products product page under related items to view those products. Now, we'll go over a few measurements for you. We have an overall length about nine and one quarter of an inch. Our mounting plate dimensions, we have five inches wide by five and one quarter inch tall. Our shank length is about nine inches and the distance from the center of our hitch pin hole to our mounting plate measures six and one eighth of an inch.

From the center of our hitch pin hole to the back of our shank we have two and a half inches. This is a nice solid shank. Now, we'll go ahead and install it and show you how it looks. Slide the shank in to the receiver tube of the hitch and we'll secure it with our pin and clip and then we can take our pintle hook which is sold separately and today we are using part number 63014. We can use the top two mounting holes or we could use the bottom two mounting holes. We could also flip this over to the rise position and again we could use our top two mounting holes or the bottom two mounting holes.

Again, this has have a capacity of 16,000 pounds. It is designed to work with a two inch by two inch trailer hitch receiver. That's going to complete today's review of part number BWPMHD14001. This is the B&W Pintle Hook Mounting Plate for two inch hitches. .


Info for this part was:

Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.