bing tracking image

B and W Pintle Hitch - Pintle Mounting Plate - BWPMHD14004 Review

content loading

Customers compare BWPMHD14004 to these similar products




Products Featured in this Video



Review of B and W Pintle Hitch BWPMHD14004


Today we're gonna be taking a look at the BMW Pintle Hook Mounting Plate for two inch hitches. The hitch mounted adapter plate provides a mounting point for a pintle hook. It's gonna offer six different positions so that's gonna let you customize the height of your pintle. It can be used in either the drop position or it can be flipped over and used in the rise position as well. It's made from a sturdy steel construction so it's got a nice, solid shank here on the unit and the steel is all covered with a powder-coated finish, which is gonna do a great job at resisting rust and corrosion. Now a hitch pin and clip or a hitch lock, to get it secured inside your hitch, those items are sold separately. If you're in need of one, you can find them at etrailer.com. The pin holes on this unit will accept the standard 5/8 inch diameter pin.

The product's made in the USA. Again, this is designed to slide into a two inch by two inch trailer hitch receiver. It offers a weight capacity of 16,000 pounds. When it comes to the dimensions of the mounting plate, going edge to edge, that's gonna give us a measurement of 5 inches wide and from bottom to top, it measures 12 and 1/4 inches tall. When it comes to your mount hole separation, the distance we have center on center, going side to side this direction is 3 and 3/8 of an inch, and then up and down is 1 and 3/4 of an inch apart on center. Overall length of the unit from very back to very front measured 13 1/8 of an inch. I also took a measurement from the center of the hitch pin hole right here to the front of the mounting plate. Got a measurement of 10 and 5/8 of an inch.

From the center of the hitch pin hole to the back of the mounting plate, that measured around 10 and 1/8 of an inch. That plate thickness here at the front is a 1/2 inch and then the distance from the center of the hitch pin hole to the closest point of the brace or the gusset, that measures 4 and 5/8 of an inch. That's gonna do it for today's look at the BMW Pintle Hook Mounting Plate for two inch hitches.


Info for this part was:

Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.