bing tracking image

Review of BAK Industries - Tonneau Covers - PARTS-356A0011

content loading

Customers compare PARTS-356A0011 to these similar products




Products Featured in this Video



BAK Industries - Tonneau Covers - PARTS-356A0011 Review


Today, we're going to take a quick look at the replacement drain valves for BAKFlip truck bed tonneau covers. Now, this comes as a quantity of two, so you'll have one for either side. And it's going to fit a variety of BAKFlip tonneau covers, including the BAKFlip F-1, the G-2, HD, Fiber Max, the VP, and Dura CS and CSF-1. This is just going to slide onto the end of your side rails, and provides that drainage tube out so that you don't have to worry about any water sitting in those side rails and causing any damage or corrosion.Now, you'd be using these with the drain tubes themselves, which are sold separately. And that's basically just going to be a little hose that you push onto the end of the valves, and that helps to channel the water away, put it outside of your truck bed, and just acts as a little conduit for all that rain, water, and moisture to go.As far as dimensions, it's going to be .. Each valve is about three inches long by about an inch, maybe an inch and a 16th wide, and overall height or depth, however you want to look at, it is about 1 3/8 of an inch.

Can move it over so you can actually see that.So again, it is a direct replacement from BAKFlip, so it should fit all those tonneau covers that I mentioned before. It's just an easy install, slides onto the end, and then you can hook up your drain tubes.That's going to do it for our look at the replacement drain valves for the BAKFlip truck bed tonneau covers.


Info for this part was:

Employee Kathleen M
Installed by:
Kathleen M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.