bing tracking image

Review of Bargman Trailer Lights - Red Lens LED Trailer Clearance Or Side Marker Light - 47-58-031

content loading

Customers compare 47-58-031 to these similar products




Products Featured in this Video



Bargman Trailer Lights - Red Lens LED Trailer Clearance Or Side Marker Light - 47-58-031 Review


Hi everybody, my name is Andy with etrailer.com, and today, we're taking a look at this Bargman Red Lens LED trailer clearance or side marker light. Now, this rectangular LED trailer light functions as a clearance or side marker light when properly mounted. I do currently have this connected to 12 volt power. Let me give you a brief demonstration of what this looks like lit up, and with my studio lights on, you can kinda get an idea of just how bright this is. Now, let me go ahead and turn my studio lights off, and you can see those four diodes and a nice clear light, and I'll just shine it here on my table, and see if I can bring that back in the focus, there you go. So you can kind of get an idea of just how bright this light is.

Now, I'm gonna turn my studio lights back on and go for a wide angle view, and just so you can see what this looks like lit up with my lights on from that angle. Now, these LED lights do make great replacements for incandescent lights, because they last 50 times longer and they're more efficient and they provide brighter light with less power output. There are no bulbs to replace, there's no brittle filaments, and this is a red lens over these white LEDs, and this is a surface mount installation, a surface mount light, but the hardware is not included, so be aware of that, you will have to source your installation hardware locally. And this is a two wire hard-wire installation, and for this light, the white wire is going to be ground, and the black wire is going to be power, and this is compatible with a 12 volt DC electrical systems. Now, this is a P2 rated light, which means that it produces a 45 degree angle of light to either side of its central line for a total of 90 degrees of coverage, and this beam pattern can be seen straight on, but it cannot be seen clearly from the side, so this type of light can be used as either a side marker light or a clearance light, but it can not be used as both.

If you need both functions, then you must install two separate lights on your trailer, one for a front or rear clearance light, and one as a side marker light. This is DOT compliance, and let me give you some measurements here. Overall, this light is right at four inches long, and we're sitting at, at the widest point, right at two inches wide, and then the overall thickness of this light, it's probably best to take the measurement this way, we're sitting a little over an inch thick, and then the distance between the mounting holes, I'm gonna go center to center, we're sitting right at three inches, so we're three inches, let me move that wire, so you can see a little bit better here, there we go, we are sitting at three inches center to center on those mounting holes. So this is a four diode light, and this light does have a one year limited warranty. Well, that's gonna conclude our look today at this Bargman Red Lens LED trailer clearance or side marker light.

Again, my name is Andy, thank you for joining me..


Info for this part was:

Employee Cole B
Installed by:
Cole B
Employee Andy C
Installed by:
Andy C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.