Brophy Drawbar for 1-1/4" Hitches Feature Review Video

Hi Nicholas, We can get you a hitch for your 2012 Ford Fusion, but the maximum capacity for the hitch that fits is 2,000 lbs towing and 200 lbs tongue weight. You mentioned the ATV is 800 lbs and trailer is 775 lbs, so that is under 2k and would be…

The only available trailer hitch we offer for a 2006 Scion xB is the Curt Trailer Hitch Receiver part #C11487 which is a direct bolt-on fit with no drilling required. This trailer hitch has a class I, 1-1/4" receiver which can be used for towing…

Both the Curt #C92UR receiver you found and the Draw-Tite #24954 are going to require slight modification to the steel bumper and plastic fascia to fit your 2022 Honda Civic Hatchback. I have linked an installation video near the bottom of the page…

Based on the measurements you took on your trailer hitch and trailer coupler, you will technically need a ball mount that features a rise of around 8-1/2 inches for a completely level setup. Between the two ball mount options you mentioned, the Curt…

If I understand your statement correctly, you have the Furrion Automatic Transfer Switch, #F50ATS installed but are not getting power to the RV. If you have not yet attempted to isolate/by pass the transfer switch to ensure the issue is within the…

I really wish we did, but we do not have any adjustable ball mounts that fit a 1-1/4 inch hitch like the #MT70068 that you referenced. The added length and leverage of the adjustable ball mounts is why they aren't made for the lighter duty 1-1/4…

The highest rise for a 1-1/4" ball mount we have available is 5-1/2", like with the Brophy #BM96. I know this isn't going to provide the perfect setup, but as long as you get within 1/2 to 1" or so of level, you shouldn't feel…

We don't have footage of the Curt #C11567 Class I hitch being installed on a 2022 Corolla hatchback but we do have a video of it being installed on a 2020 model, see the link. I've spoke with my contact in the engineering department at Curt,…

That's a good question, and you did indeed measure correctly, from flat ground to the top of your hitch receiver. Since that measurement is 10 inches and your trailer coupler is 15 inches, 5 inches is the correct rise, but an extra half-inch is…

The European style ball mount like #C45592 will work well in place of the standard fixed style ball mount. These are normally only compatible with 1-1/4 inch receiver openings. You would follow the same rise sizes based on your needs. I've…

From the center of the hitch pin hole to the back of the platform for the Draw-Tite Drawbar #36061 measures about 7" (see attached).

I spoke with my contact at Curt and he said the Curt trailer hitch #C11389, which you reference, is a confirmed fit for your 2014 Lexus IS 250. The hitch will not interfere with the factory exhaust, however the exhaust must be temporarily lowered for…