bing tracking image

Review of Brophy Camper Jacks - Single Cable Camper Jack - BR29ZR

content loading

Customers compare BR29ZR to these similar products

Products Featured in this Video

Brophy Camper Jacks - Single Cable Camper Jack - BR29ZR Review

Hi there. I'm Michael with Today, we're gonna take a quick look at this Brophy Cable Camper Jack. This is a single jack that's going to help you load and unload your truck bed camper. Now, when you're using jacks, you're always gonna need to use them in a pair. So, this is great option if you're needing to replace one of the two original, or if you're wanting to add a third jack, just for some extra stability.

But this cannot be used on its own, so you will need at least one other one as well. This does have a weight capacity of 1000 pounds. And that is of course, when you're using it with a pair. So, it won't have that full weight capacity itself. But, once you have it paired up with another one, you'll be able to lift and hold 1000 pounds.

It's got a lifting range of 17 inches up to 57 inches. I'm about six foot three. So if that gives you an idea of where this is gonna stand. It does have this extra tall pole that's going to help clear your truck beds on your pickup. So, it's going to make it very easy for you to get that truck bed camper out, no matter how tall those bed rails are.

The overall height when assembled is about 63 inches. Gives you an idea there, of the height you're working with. This is a portable design. So, it can be disassembled into three different pieces. You've got your foot piece here, your upright pole, and then your bracket here, your lift bracket.

So those three can be disassembled for storage or transport. So, instead of having to permanently install a jack on your camper, this will allow you to only use it when you need it. But only have it there when you need it. So this L shape the bracket here is what's going to support your camper. So, you'll sit the bottom inside of your camper here, in this L shape bracket. This is 21 and a half inches long, two inches wide, and two inches tall. So, very easy to put in place under your camper. That's gonna support that weight. Then the hand winch here. It's going to allow you to easily lower or, raise the jack. It's got a gear ratio of three to one. So, it's pretty quick. Of course, I don't have any weight on here, but this is going to very easily allow you to raise and lower your camper. Once you have it off your truck, you can lower it down, lift it back up when you're ready to get your truck back under it. Now, this does have the safety latch, that's gonna keep the cable from free spooling. And then the plastic handle here is going to make it very easy to keep your grip, as you're rotating that around. The tripod base is going to give us some extra width here. So it's going to just evenly distribute the camper's weight. Help eliminate that front to back and side to side motion. You can see we have the large foot plates there, that are gonna help prevent this from sinking and tilting. But of course, you always wanna make sure that you're gonna be using this on level ground. This does have a durable, corrosion resistant construction. The tripod base and the lift bracket both have a black powder coat finish to them to help resist rust and corrosion. Our upright pole is galvanized. And our cable is an aircraft grade cable, so it is gonna be very strong and durable. This jack is made here in the USA, so you can trust it's gonna be made to the quality standards we've come to know and trust for products that are made here in the US. So if you are looking to replace your original, one of your original jacks, or like I said, adding on a third one, this is gonna be a great option for you. So, that completes our look for today. Again, I'm Michael with Thanks for watching..

Info for this part was:

Employee Michael B
Installed by:
Michael B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.