Brophy Hitch Adapters - Hitch Reducer - HT02 Review

content loading

Customers compare HT02 to these similar products




Products Featured in this Video



Review of Brophy Hitch Accessories HT02


Today we're going to take a look at the Brophy hitch reducer for a two inch to a one and a quarter inch, number HT02. This adapter allows you to use your current hitch accessories on either a two inch hitch or, thanks to this device, a one and a quarter inch receiver hitch. It will easily convert your two inch receiver to a one and a quarter inch receiver. It has a maximum tongue weight of 300 pounds. It has a towing capacity of 3000 pounds, or the lowest rated towing component which means if your hitch or your vehicle has a towing capacity of less than 3000 pounds you need to go with that one to ensure that you're towing safely. The sleeve design does not reduce tongue weight capacity, as an extender would.

It measures three inches from center to pin hole to center to pin hole. Overall it is seven inches long by about two inches tall. It comes with a powder coated black finish. It conveniently comes with a half-inch pin and clip to hold the one and a quarter inch accessories into place. You will use the five-eighths inch pin and clip that should have come with your hitch to attach this to the hitch.

If it did not come with a five-eighths inch hitch pin and clip we do sell those separately, number PC3. Let's bring this in and show you how this is done with our two inch hitch right here. You will take the larger of the two holes, insert that right in here, lining up the holes. Using your five-eighths inch pin and clip slide that through, clip that off and now you're ready to use your one and a quarter inch hitch accessories, say bike rack, cargo carrier, ball mount whatever it is you need to use. You'll slide that right in here, you'll line up the holes and then you just pop that through and clip that off.

There you have it. That was our Brophy hitch reducer two inch to one and a quarter inch, number HT02.


Questions and Comments about this Video

Info for this part was:

Employee Matthew K
Installed by:
Matthew K
Employee Brandon M
Installed by:
Brandon M
Employee Cole B
Installed by:
Cole B
Employee Alan C
Video by:
Alan C
Employee Chad S
Video Edited:
Chad S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.