bing tracking image

Review of Bulldog Winch Jumper Cables and Starters - Jumper Cables - BDW20332

content loading

Customers compare BDW20332 to these similar products




Products Featured in this Video



Bulldog Winch Jumper Cables and Starters - Jumper Cables - BDW20332 Review


Today we're going to take a look at the Bulldog winch booster cables set. This is going to be a clamp to clamp set in a one gauge wire with 20 feet of length. And we'll get our nice storage case here to hold our cables. On the front, we'll have two clasps to keep that case closed. And then on the inside we'll have our cables themselves. Now again, these are going to be at one gauge wire, so it's going to be pretty thick, sturdy wire.

This is going to be 2000 amp rated, and the clamps are going to have a premium cast brass design, with a 45 degree angled noes.So it's going to make it a little easier to get our clamps put onto our battery terminals. And these are going to be obviously color coated. We'll have our red for positive, black for negative, but it's also a stamped onto each of those clamps. So we'll have the negative symbol there and the positive symbol on our positive clamp. And that's going to be on both sides of both of those clamps.

There's a split there, so we'll have plenty of room to get our clamps put onto our battery terminals. And this is going to be a double extruded copper clad aluminum wire.So as you can see it's going to be very bendy, very easy to maneuver. And with 20 feet of length, even if we're going from one truck to another, maybe over a parking spot, we'll still be able to get those hooked up pretty easily without having to rearrange too much. Now, this is going to have a TPE jacket, and that's going to be rated up to 221 degrees Fahrenheit. Again, we'll have our storage case to keep everything nice and contained.

As far as the dimensions on this case, it's going to be 18-1/2 inches long and then 14-3/4 inches tall and then it'll be 5-3/4 inches deep. So if you're storing this underneath your seat, as long as it fits within those dimensions, you should be good to go.And that's going to do it for our look at the Bulldog winch booster cables set clamp to clamp on a one gauge wire design with a 20 feet of length.


Info for this part was:

Employee Kathleen M
Installed by:
Kathleen M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.