All About the Buyers Products 3" to 2" Receiver Tube Adapter Video

Hey Derrick, I checked directly with TorkLift for you, and the TorkLift Tie Downs - Front and Rear #TL87DR are a fit for the 2024 Ford F-350 with the bed access step near the cab. The #TL87DR are also specifically for an 8 foot long bed as well as…

For a 15 inch steel trailer wheel that uses 1/2 inch lug nuts like the one in tire and wheel combo #A225R645SWM the lug nuts should be torqued to 90 to 120 foot pounds. I have also included a picture of a handy lug nut torque chart for reference. If…

The trailer hitch pin hole diameter on your 2018 GMC Sierra 2500/3500 could be either a 5/8" or 3/4". The OEM makes the 3" trailer hitch receiver and not all of them use the same diameter trailer hitch pin hole but it is normally a 5/8…

Yes, the gooseneck hitch balls for the factory prep packages are the same for Ram and Ford. If you need a new hitch ball for either of these systems than you can use the Curt Pop-In Ball part #C60601 or the Reese Pop-In Ball part #RP19311.

The wall thickness of the Buyers Products Plain Receiver Tube #337RT255812 that you referenced is 1/4 inch which means it's outside diameter is 3 inch by 3 inch.

The outer tube dimensions of the Buyers Products Black Receiver Tube #337RT25818B are 2-1/2" x 2-1/2" square. The length of the tube is 18" long.

As the Buyers Products Plain Receiver Tube 2-1/2" I.D. x 12" Long #337RT255812 is a fabrication part, the tongue weight capacity will depend on the other parts used and what it will be installed on. Due to this, it does not carry a specific…

For your 2 inch tongue the Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 3,500 lb #CT-3001-Z is my recommendation. Then I'd use the Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Trailer Tongue - Bolt…

The Trailer Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2" #e33YR will be your best option for reducing your 3" receiver opening down to 2-1/2" or 2". Then you can install Malone 2" Dual Purpose Hitch Receiver…

For a 48" hitch extension that fits a 3" receiver you're going to want the TorkLift Cannon Hitch Extension item #TLE1648. This hitch extender is specially designed to work with Ford's 3" factory trailer hitch. This is the only…

I have two options that will allow for you to extend the connection point between your truck and trailer. The best option for you will depending on the gross trailer weight (GTW) and tongue weight (TW) of your trailer. As long as the GTW and TW of…

I do have a way for you to use your Avail tow bar with a 3-inch hitch receiver, however, there are no replacement shanks that fit a 3-inch hitch receiver. All you need to use a tow bar that fits a 2-inch hitch receiver in a 3-inch hitch receiver is…