bing tracking image

Review of Buyers Products Hitch Fabrication Parts - Receiver Tube - 3371804055

content loading

Customers compare 3371804055 to these similar products




Products Featured in this Video



Buyers Products Hitch Fabrication Parts - Receiver Tube - 3371804055 Review


Jeff Hello, everybody. This is Jeff at etrailer.com. Today, I'm gonna take a look at the Buyers Products bolt on two inch receiver tube. With the mounting plate. Now this bolt on receiver tube will bolt directly into any hitch plate that has a standard pin to hook hole pattern. So this will allow flexibility in switching from a pintle hook to a ball hitch towing.

Has a two inch by two inch receiver tube, which is welded to a 1/2 inch steel mounting plate. And the finish on it is a black powder coat finish for corrosion resistance. It is a carbon steel construction. Has the two gussets you could see, one on top, one on the very bottom for added strength. And it features a nice sturdy cast seel collar.

And it uses a standard 5/8 inch diameter hitch pin hole. Now the bolt on tube is 6 1/2 inches long. And it's rated at 20,000 pounds. Now it does require an installation kit, which we do sell separately on our website. It'll include all the hardware you need to install this.

It is part number 3-3-7-8-5-2-0. And it's usually listed on this product page as a related product. Again, the maximum gross trailer weight capacity's 20,000 pounds. Tongue weight capacity is 2,000 pounds, Give you a few measurements on it. The length from the very back to the very front.

It's about 6 1/2 inches long. The plate itself, it's gonna be five inches wide by six inches tall. And we mentioned it's a 1/2 inch thick. And then the mounting hole measurements, if we go horizontally, center to center. It's right at 3 3/8 inches. Center to center vertically is 3 1/2 inches. Does come with a nice set of instructions that will describe and show you how it installs. But that should do it for the review on this Buyers Product bolt on two inch receiver tube with the mounting plate..


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.