Feature Review Hitch Pin and Clip For 2-1/2" and 3" Hitches Video

Yes the Brophy Pintle Hook #BR27FR does fit a 3 inch diameter lunette ring like you mentioned as that's a standard size.

Yes, we have the Replacement Lithium Converter for Progressive Dynamics 4000 Series RV Power Control Center - 45 Amp, #PD4045LICSV. This upgrades or replaces the converter in your 45-amp Progressive Dynamics 4000 series Power Control Center to a…

I spoke to Progressive Dynamics and they mentioned that your converter is a WFCO model 88955 converter, and the correct replacement is the Progressive Dynamics Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4655V.

To replace the converter section of your WF-8955PEC you'll want to use the Progressive Dynamics Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp #PD4655V. This unit will fit in the same dimensions that your WF-8955PEC…

I took a look at the replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4655V that you mention, and unfortunately it will not work with lithium batteries, and should only be used on flooded lead acid, AGM, and gel batteries.

Hey Kevin thanks for your question. There is not much downside to going with the 5,000 lb springs instead of the 3,500 lb. A higher rated spring may make the ride a bit more "chunky" at times, since the spring would not flex as easily.…

We have the Draw Tite front hitch part #65053 that fits your 2022 Ford E-450 Jayco motorhome.

When it comes to locking your Reese Tri-Ball #RP47FR to your hitch I recommend The etrailer Trailer Hitch Receiver Lock for 2 inch Hitch - Flush - 2-5/8 inch Span - Stainless Steel #e98882. The lock has an overall length of 6 inches and has a pin…

The trailer wheel part #AM32575 that you referenced is designed to be used with acorn lug nuts and not ball style. The part #KALN1375S would work great as this is the correct size, taper, and since it's a solid stainless steel lug nut you…

I attached the chart you referenced and it states that when you use a #e54SR spring with a hanger kit part #APS3 the hanger distance should be 24-7/8 inches. The length of a spring when new and not installed on a trailer will be slightly shorter than…

The Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear #APS2 will work well for your 1-3/4 inch wide leaf springs. Double eye springs are the style have both the bolt in the front and rear and are more common…

For double eye leaf springs, I recommend going with the 4-Leaf Double-Eye Spring #SP210275. This spring is 25-1/8 inches long x 1-3/4 inches wide and designed for 3,500 pound axles. These springs are a common length for 3,500 pound trailers. One…