bing tracking image

Buyers Products Pintle Hitch - Pintle Hook - Air Compensated - 337PH50 Review

content loading

Customers compare 337PH50 to these similar products




Products Featured in this Video



Review of Buyers Products Pintle Hitch 337PH50


Speaker 1: Today we're taking a look at a 50-ton pintle hook. Now this pintle hook is designed to cushion movement between the pintle hook and the toe ring or the net ring. This feature saves wear and tear on the parts, especially in sudden motion or breaking situations. This is a six-hole mount. It's a bolt-on installation. And it's designed to work in tandem with the vehicle's air system to hold the draw bar eye closely to reduce wear, absorb shock, and prevent uncoupling during operation.

The hook is ideal for heavy-duty applications such as trailers and semitrailers, both for off-road and over-the-road use. This product can also be used without the air chamber and plunger as a standard pintle hook. Those items are not included with this product, so please be aware of that.When it comes to the construction, we're looking at a nice, durable design, extremely strong iron and cast steel construction and it features a nice corrosion-resistant, powder-coated finish. This is designed to work with a lunette ring with a diameter of 2 and 3/8 to 3 inches with an 1 1/4 to a 1 5/8 inch diameter cross section. The unit's very easy to use and operate.

It has the pinning clip right here, so you remove that. That is tethered to the unit so you don't have to worry about misplacing that or losing that. Take the T bar, slide it back, and then lift up. That opens the unit so that way you can easily connect your lunette ring and then drop this back down and secure it in place with the included pen and clip.The unit features a maximum gross trailer weight capacity of 100,000 pounds, and a maximum tongue weight capacity of 20,000 pounds. A few measurements I wanna go over with you real quick.

I took a measurement of the overall width, so from outer edge to outer edge I got a measurement of 9 1/2 inches. From the very bottom of the unit to the very top of the unit, I got an up and down measurement of 7 9/16 inches. And the overall depth from very back to very front, I got a measurement of 7 1/8 inches. The mount holes on the unit are separated on center, side to side by five inches. From this one to this one to this one on center is 4 1/2 inches.

From the top hole to the middle hole on center is 2 3/8, from the middle hole to the bottom hole on the center is 2 1/8 inches.That's gonna do it for today's look at the 50 ton pintle hook.


Info for this part was:

Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.