bing tracking image

CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE27840 Review

content loading

Customers compare CE27840 to these similar products




Products Featured in this Video



Review of CE SMIth Boat Trailer Parts CE27840


Today we're going to be taking a look at part number CE27840. These are the CE Smith carpeted bunk boards for boat trailers. The belt boards are going to measure about six feet long. What you see is what you're going to get. So with this part number you're going to get two carpeted bunk boards. These are going to support your boat's hold during trailering.

They're going to feature marine grade black carpeting with a nice finish so they're very strong, soft, durable and weather resistant. The carpet is going to be secured to wooden 2 X 4's that are untreated southern yellow pine. The carpet is going to be secured to the board using heavy duty staples all along the bottom here as well as on each end. It's done really well so the seams are going to be very clean. Now these boards are going to minimize scratches on the hole of your boat. THey're also going to resist mold and mildew.

They're going to rinse off very easily and they're going to dry really quickly. The bunk boards are installed a couple of different ways. You can either mount these to the existing brackets on your trailer frame if you we're going to purchase these as replacement boards or you can attach them to the trailer frame with swivel brackets. Those are going to be sold separately and we do carry them here at E-Trailer.com. That's going to allow for the height and angle to be adjusted so that's a great advantage to have. If you don't already have some swivel brackets, check those out and see if they're going to work for your application.

You might want to pick some of those up. You can run these bunk boards front to back for traditionally shaped holes or side to side for flat bottom boats, kayaks and inflatables. CE Smith is going to make this product here in the USA. Again with this part number you're going to get two bunk boards. Now I'm going to finish up by going over the overall dimensions and measurements of the boards. Now you can lay these flat on your application or you can stand them upright.

That's going to be totally up to you for whatever works best for your particular trailer and boat. Measuring this direction it's going to give us an overall measurement of about three and three quarters of an inch. Now the overall length on these boards measuring from end to end, that's going to give us a measurement of about seventy two and a half inches and in the width measuring this direction it's about one and three quarters of an inch. That's going to do it for our review of part number CE27840. These are the CE Smith carpeted bunk boards for boat trailers. Again you're going to get two carpeted bunk boards and each one's identical. They're going to measure about six feet long. .


Questions and Comments about this Video

Info for this part was:

Employee Zack K
Video by:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.