bing tracking image

CE Smith Trailer Hubs and Drums - Hub - CE13109 Review

content loading

Customers compare CE13109 to these similar products

Products Featured in this Video

Review of CE Smith Trailer Hubs and Drums CE13109

Today we're going to take a look at the CE Smith Pregreased Trailer Hub Assembly with the carrying case for 2700 pound axles and a 4 on 4 inch bolt pattern. When you receive it you'll get it just like this in this nice hard carrying case. This kit will let you replace one hub assembly on your trailer. We'll pop it open here and we'll show you the hub assembly itself right here. It includes the bearings pre-installed, the bearing races, the grease seal. In a separate bag it will have the grease cap, the lug nuts and the cotter pin. Comes in this nice hard plastic carrying case with this nice handle.

It'll keep all the parts in one place, so it's perfect for storing on board your trailer in case of an emergency. We'll get this assembly out of the bag just to show you. You can see it is a pregreased hub with a heavy duty marine-grade lubricant. It's ideal for boat trailers. The hub itself is a strong cast iron hub. It's painted black.

The very back here, you'll notice, they've already installed a double-lip grease seal to help keep moisture out and the grease in. In a separate it has the lug nuts, the cap and the cotter pin. They're all zinc plated to help limit corrosion. This part is made in the USA. The application for this is 2700 pound axles. The maximum wheel diameter is 12".

The bolt pattern on this is a 4 on 4 inch bolt pattern. The wheel bolt diameter is 1/2". The hub inner diameter on this assembly is 1.98". The flange diameter which is measured outside to outside here is 5-9/16". Weight capacity on this one assembly is 1350 pounds.

When this is combined with one on the other side of the axle it will meet your 2700 pound axle capacity. The bearings that are included in this, they use the same part number inner and outer. It's part #L44649. The bearing races which are pre-installed also include both the inner and the outer race. The very back here, you can see they've pressed in the double-lip grease seal. It's part #12192TB. The grease seal has an inner diameter of 1.249" and an outer diameter of 1.983". Again, we'll go ahead and put it right back in the bag and you can see everything will store very nicely in this hard carrying case and a nice handle to carry it. That should do it for the review on the CE Smith Pregreased Trailer Hub Assembly with the carrying case for 2700 pound axles with a 4 on 4 inch bolt pattern.

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.