bing tracking image

CE Smith Trailer Hubs and Drums - Hub - CE13110 Review

content loading

Customers compare CE13110 to these similar products

Products Featured in this Video

Review of CE Smith Trailer Hubs and Drums CE13110

Today we're going to take a look at the C.E. Smith pre-greased trailer hub assembly with the carrying case for 2,500 lb axles with the four on four inch bolt pattern. This kit will let you replace one hub assembly on your trailer. Comes just like this in this nice hard carrying case. Just flip it open. This kit will include the bearings, the bearing races and the grease seal, all the hub right here. Then in a separate bag it includes your grease cap, your lug nuts and your cotter pin.

This nice hard plastic carrying case with the handle here keeps all your parts in one place so it's perfect for storing on board your trailer in case of an emergency. Going to remove this from the bag here, and again we mentioned, it is pre-greased with a heavy-duty marine-grade lubricant. It's ideal for boat trailers. You can see it's all pre-greased there. This is a strong, cast-iron hub. It's painted black, has a double-lip grease seal that's installed in the back here.

Helps keep the moisture out and the grease in. On the separate bag here that has the lug nuts, the cotter pin and the grease cap, they're all zinc plated to help limit corrosion. This part is made in the U.S.A. The application for this hub is 2,500 lb axles. The maximum wheel diameter is 12 inches. The bolt pattern on this is a four on four inch bolt pattern.

The wheel studs here, they're 1/2 inch diameter by 1 5/8 inches long. The hub inner diameter is a 1.98 inches. The flange outer diameter, which is measured side to side here, is 5 9/16 and the weight capacity on this one assembly is 1,250 lbs, so when this is combined with one on the other side of the axle, they'll meet your 2,500 lb axle capacity. The bearings that are included and installed in this and pre-greased, the inner and outer bearings use the same part number, L44643. The bearing races are pre-installed for the bearings to ride on. The double lip grease seal we mentioned, that is included and all installed, it's part number 12192TB, has an inner diameter of 1.249, outer diameter of 1.983.

Go ahead and put this all back in the bag, but this is how you will receive it, all in this nice carrying case. All you have to do is flip it closed, lock it shut, and then you have a nice carrying case that you can keep in the trailer with you. That should do it for the review on the CE Smith pre-greased trailer hub assembly with the hard carrying case for 2,500 lb axles and a four on four inch bolt pattern.

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.