bing tracking image

CE Smith Trailer Hubs and Drums - Hub - CE13210 Review

content loading

Customers compare CE13210 to these similar products




Products Featured in this Video



Review of CE Smith Trailer Hubs and Drums CE13210


Today we're going to take a look at the C.E. Smith Pre-Greased Trailer Hub Assembly in this hard carrying case for 2,500-lb axles with the 5 on 4-1/2" bolt pattern. Now, this is a pre-greased hub assembly as uses heavy-duty marine-grade lubricant, which is ideal for boat trailers. See, it comes all wrapped in here. Everything comes pre-installed. Now this kit will let you replace one hub assembly on your trailer. It includes the bearings, the bearing races, the grease seal, the grease cap.

In this bag with the grease cap, the lug nuts, and the cotter pin for installing it. This case is perfect for storing onboard your trailer in case of an emergency. This is a strong, cast iron hub. It's painted black. They do use a double-lip grease seal in here pre-installed to help keep moisture out and grease in. We did mention on the lug nuts, the cotter pin, and the grease cap it is all zinc plated to help limit corrosion. This part is made in the USA, and again the application on this is 2,500-lb axles.

The maximum wheel diameter used is 12". The bolt pattern is a 5 on 4-1/2" bolt pattern. The wheel studs are 1/2" diameter by 1-7/8" long. The hub inner diameter on this assembly is 1.98". The hub flange outer diameter, which is this measurement here, is 5-9/16".

The weight capacity on this is 1,250 lbs, so if one of these is used with one on the other side it would meet the 2,500-lb axle capacity. Now the bearings that are used in this, they use both the same part number inner and outer. It's L44643. The bearing races are pre-installed, and the grease seal in the very back is part number 12192TB, and that is pre-installed. Everything would come to you just like this here, and then you can just keep it in this nice hard carrying case. Locks down, and you carry it with you, but that should do it for the review on the C.E. Smith Pre-Greased Trailer Hub Assembly with the carrying case for 2,500-lb axles, and a 5 on 4-1/2" bolt pattern..


Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.