Hands-On with the Channel Style Adjustable Ballmount Video

According to the installation instructions, the torque specification for the 2-5/16" ball that comes with the Blue Ox 2-Point Weight Distribution w/ Sway Control - 6-Hole Shank - 10K GTW, 1.2K TW item #BLU75FR is 260 ft lbs. The socket you will…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

Yes it will! The Rubber Bumper #C45921 is a direct replacement for the Curt Adjustable Ball Mount #C45900 but the only differences between the shank that comes with that system and the Replacement Shank #C45917 that you referenced is the weight…

The BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch part #MD204 has a pretty standard 3" wide channel so you can use other channel mounted accessories. The adjustment holes are then 1-1/4" apart and 3/4" in diameter.

Yes the Demco Lunette Ring part #DM09557-97 will work with the Curt Channel Style Adjustable Ballmount part #C45900. It will be rated for the 1,400 lb tongue weight and the 14,000 lb gross trailer weight rating of the Curt ball mount. Replacement…

You should have no problem using the 2-Tang Clevis for BulletProof Hitches Adjustable Ball Mount item #358CLEVIS on your current ballmount. I say should because I have no idea which one you have but I do have the bolt hole measurements so you can…

The total height of the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise #BWTS10037B in the rise position is 9-1/2 inches from the center of the shank's pinhole to the top of the ball (in the highest position).…

The average trailer coupler height is in the neighborhood of 16-19 inches. What I'd recommend you do is put the various trailers you tow up on their jack so the frame is level to the ground, and measure their coupler height (see linked article).…

For a 2 inch hitch ball that has no rise and no drop, I recommend the Curt Solid 2-Ball Mount for 2" Hitches - 2" and 2-5/16" Balls - 10K - Black #C45660. For your anti-rattle, I recommend the Roadmaster Quiet Hitch for 2" Trailer…

I do have an option for you but the ball platform portion of the Curt Channel Style Adjustable Ballmount part #C45901 is not available separately. That said, I can confirmed that it works with the channel portion of the Channel Style Adjustable…

The Dexter 2-Tang Clevis #T1807800 has mounting holes that will line up with the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitches #MD254, but the Clevis uses 3/4" pins while the BulletProof shank uses 5/8" pins for the ball mount.…

The Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA94-00-0600 will allow you to use the Fastway e2 Weight Distribution Shank #FA92-02-4214 to get the extra clearance you desire without compromising the capacity at all.