Camco RV Vents and Fans - Roof Vent - CAM40431 Review

content loading

Customers compare CAM40431 to these similar products

Products Featured in this Video

Review of Camco RV and Camping CAM40431

Today we'll be reviewing part number CAM40431. This is the Camco RV and Enclosed Trailer Roof Vent Cover with a detachable screen. It's going to be a nice bright white in color. The cover is going to enclose your roof vent so you can safely open it at any time, rain or shine. It's going to let in light and air while keeping the elements out. It's also going to eliminate the threat of water leaking in to your RV through the roof vent and it's going to give you freedom to leave your vent open while driving down the road. Here on the rear side the screen is going to offer a high level of air flow and it's also going to keep out insects.

The screen unscrews from the cover for cleaning and access to the roof vent if you ever need to get in there. All you got to do is remove the two Philips head screws here at the top of the vent and that's going to actually pop out of place. You can get in there and remove any leaves or debris that's gotten in there. You can gain access to the vent and clean as needed. It's also going to feature an aerodynamic rounded design that's going to reduce air drag. It's also going to feature a leak proof installation with the included mounting hardware so everything you need to get this installed is included.

You're going to get the brackets and you're going to get all the screws, the lock washers, the washers and the nuts. This is going to feature an installation where you drill holes into the existing vent frame instead of the roof. That's going to help prevent leaks. Once it's installed you'll notice a small gap between the flange of the cover and the roof of your RV or trailer. That is completely normal and that actually helps prevent condensation from gathering without letting in any rain. It's got the UV stabilized polyethylene that's going to hold up to the sun for years of use and again it's a nice white in color.

This is going to fit your standard 14-inch by 14-inch roof vents. If we measure the overall width from the outside of the two outer most points of the flange, that's going to give us a measurement of 18-1/2 inches. Doing that same measurement this way is going to give us a measurement of 18-1/2 inches. The overall height this is going to provide measuring from the base to the top is going to give us a measurement of about 9-1/2 inches. Take a look on the inside that way you can see back here it's got that nice vent with the built in screen so it's going to keep out insects but again it's going to let you keep the vent open at any time. It's got the four mount locations so you're going to have one here, one here, one here and then one back here. This portion of the bracket's going to drill into your existing roof vent and then this portion right here is going to be where it's going to mount to the actual cover.

So again all the mounting hardware is included. Really simple installation. I think that's going to do it for our review of part number CAM40431. This is the Camco RV and Enclosed Trailer Roof Vent Cover with a detachable screen. .

Questions and Comments about this Video

Info for this part was:

Employee Kathleen M
Video by:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.