bing tracking image

Curt Brake Controller C51520 Review

content loading

Customers compare C51520 to these similar products




Products Featured in this Video



Review of Curt Accessories and Parts C51520


Today we're going to be taking a look at Part Number C51520. This is a Curt Wiring Adapter for Cequent Trailer Brake Controller Wiring Harnesses. You can use a Curt electric trailer brake controller with this adapter. All you have to do is plug one end of the adapter into your Curt controller which would be this end here and then plug the other end into the Tekonsha, Reese, Draw-Tite, Pro Series or Tow Ready wiring harness in your vehicle. This does not require any cutting or splicing of the wires for the complete installation. Simply one connector end is going to plug into the existing Cequent Wiring Harness in your vehicle.

That's this connector here. The other end is going to plug into the back of your current electric brake controller. This is compatible with time-delayed and proportional brake controllers from Curt. All you have to do is make sure that the brake controller has a built in plug for the adapter to connect. This will not work on controllers with pigtail wiring harnesses. Now, taking the measurement of the overall length measuring from edge to edge, that's going to give us a measurement of about 6 inches.

The actual wire length in between the two connectors, that's going to give us a measurement of about 3 inches. Now for demonstrations today, I do have a wiring harness from Cequent. This would've been installed in a vehicle and it would've been working with a different type of brake controller that's not Curt related but let's say we want to keep the wiring harness in our vehicle but we want to change out our brake controller for our Curt brake controller, then this adapter right here, Part Number C51520 is going to be exactly what you need. It's going to plug into the existing Cequent wiring harness just like so and then now, it's going to convert it to where it can connect to your Curt trailer brake controller. To disconnect, all you have to do is lift up on the tab, wiggle the connections lose until it fully disconnects. That's going to do it for our review of Part Number C51520. This is the Curt Wiring Adapter for Cequent Trailer Brake Controller Wiring Harnesses.

.


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Leah B
Edited By:
Leah B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.