Curt Gooseneck C60691 Review Video

Hey Lyle, we actually have a version of the Gen-Y offset gooseneck ball that was designed to fit the OEM gooseneck hitch of your 2017 Ford F-250 with the part #GY43XR. This provides up to 5 inches of additional offset to help with turning clearance.…

Great question, Kevin. The Onboard Scale system on your 2024 Ford F-350 Super Duty works by essentially measuring how low the bed is sitting and it gives an estimated weight based off of that. If you added a suspension enhancement then that would…

Hi Matt, There is; the MORryde you have is essentially the replacement for the Lippert Rhino, so you'd want the Gen-Y that replaces the Rhino. The 5,500 lb pin weight Gen-Y that fits in place of the Rhino is the following: - Gen-Y Hitch Shock…

If you were to use the 4 inch offset ball #BWGNXA4085 the pin weight on the ball will not be changed. What will change is where the weight is carried on the truck. Using the offset ball will put more weight 4 inches back from the center of the…

The Red Label bags like the part #F2706 are much heavier duty than the standard duty bags like the #F2598 that you also mentioned. The pressure rating is 150 psi vs. 100 psi, the weight capacity is 7,500 vs. 5,000 lb, and overall they are just larger…

Yes, the Curt Safety Chain Loops for Ford Factory Rail Kit part #C60691 that you referenced are a confirmed fit for the factory rail kit in the bed of your 2019 Ford F-350. I attached a review video for this kit for you to check out as well.

As you have a Lippert Tuning Point pin box the only replacement we have is the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY48GR. This converts your 5th wheel to a gooseneck ball connection so you will need a gooseneck ball in your…

Hey Michael, the Grand Design Reflection 100 series 27BH that you are interested in has a Lippert 1621 style pin box so the Goose Box you would want is the part #RP94716 which was designed to fit it. The part #RP94716-61301 is same Goose Box but it…

Yes, since the Gen-Y Hitch Gooseneck Trailer Hitch for Ford OEM Puck Systems #GY43XR has a 5" offset it will place the pin weight 2-1/2" behind the current center of your gooseneck hitch ball. This does means the front axle will be prone to…

There is an option for an offset gooseneck for your 2023 Ford F-250 or F-350 Super Duty with the OEM puck system, but it isn't just the hitch ball. Technically it's a gooseneck hitch and gives you 5 inches of offset; the hitch is from Gen-Y…

Hey MIchael, some play like that is normal with the Gen-Y ball part #GY43XR so I wouldn't worry too much about it.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…