bing tracking image

Curt Ball Mounts - Fixed Ball Mount - C45014 Review

content loading

Customers compare C45014 to these similar products




Products Featured in this Video



Review of Curt Ball Mounts C45014


Today, we'll be reviewing part number C45014. This is the Curt Class II Drawbar, rated at 3500 pounds. This is made from a sturdy solid steel construction. You can see here on the back side of our shank we have a nice solid shank. It's not a hollow point, has a really nice corrosion resistant black gloss, powder coat finish, so it's going to stand up well against rust and corrosion. This ball mount goes through a high quality manufacturing process.

It is CNC Machine for strong, consistent cuts and welds and it goes through a seven stage washing method. It's going to help deliver a smooth clean surface. Please keep in mind when using this drawbar, it can only be used in the rise position. It is designed to fit 1 1/4 inch by 1 1/4 inch trailer hitch receiver and it's going to be compatible with class II only, has a gross towing weight of 3500 pounds and a maximum tow weight capacity of 350 pounds. This portion here is the portion that's going to slide into the shank of the hitch on your vehicle. You would than line up your pinholes and install a half inch pin and clip or you could do a pin and lock.

Those items are sold separately and you can refer to our website to view those products. When choosing a hitch ball or an accessory with a shank you want to make sure that it does not exceed a 3/4 inch measurement. That's the diameter of our ball hole, so that's how much room we have to work with. Another measurement to go over real quick. I want to measure from the center of our ball hole to the center of our hitch pinhole.

That's going to measure about 9 5/8 of an inch. When we have this installed, if we do the measurement from the inside top edge of our receiver tube to the top of our ball platform, we're going to have about 5 inches between those 2 points. That's where we get our rise measurement from. That's going to complete today's review of part number C45014. That's the Curt Class II Drawbar, rated at 3500 pounds.

.


Info for this part was:

Employee Andrew K
Installed by:
Andrew K
Employee Cole B
Installed by:
Cole B
Employee Dustin K
Video Edited:
Dustin K
Employee Thomas T
Video by:
Thomas T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.