bing tracking image

Curt Ball Mounts - Fixed Ball Mount - C45155 Review

content loading

Customers compare C45155 to these similar products

Products Featured in this Video

Review of Curt Ball Mounts C45155

Today we're going to be taking a look at part number C45155. This is the Curt Fusion Ball Mount for 2" Hitches. It's going to feature a 2" hitch ball that's going to be permanently attached right at this point here. It's going to let you hook up your trailer to your tow vehicle. The shank is going to be the portion that slides into the receiver tube of your hitch. Then the 2" ball's going to provide a good connection point for your trailer's coupler.

Now, the unique thing about the Fusion is the hitch ball is welded to the ball platform. There's no need to torque it down. This thing is going to be set and ready to go straight out of the box. Also, here on the under side of the platform, you don't have the rest of the threaded portion like on our traditional mounts. You don't have the lock washer or the nut hanging off the bottom of the platform. Solid steel surface down here.

This is going to prevent theft of the hitch ball because you cannot take this off, it's welded on to the platform. It's going to eliminate somebody being able to come up to it and loosen it. It's also going to provide a nice secure strong towing setup. The overall unit is made from a sturdy steel construction. It's going to have rust-resistant finishes. You can also see back here, you have a hollow shank.

The ball mount's going to feature a black powder coat finish and then the hitch ball's going to feature a nice chrome-plated finish. The pin and clip are included. As you can see here. It's going to be your standard 5/8" pin that comes with a clip. If you want to lock it to your hitch, the lock is going to be sold separately.

You can find the hitch pin and lock right here on our website. This is designed for 2" x 2" trailer hitch receivers. It's going to offer a gross towing weight of 7,500 pounds with a maximum tongue weight of 750 pounds. Again, the hitch ball size is going to be 2". A few measurements to go over with you real quick. The measurement that we have from the center of the hitch pin hole to the center of the hitch ball, that's going to give us a measurement of about 8 1/8". This is going to provide a rise of 2 1/4". That's measuring from the top of the shank to the top of the ball platform. Curt's going to cover this with a limited lifetime warranty. Real quick I just want to go ahead and show you how will it install inside of your hitch. All you have to do is take the mount, place it into the receiver tube of your hitch. Again, this is designed to work in the rise position only. Once you have the hitch pin holes lined up, simply insert your hitch pin and secure it on the other side with the clip. That's going to do it for our review of part number C45155. This is the Curt Fusion Ball Mount for 2" Hitches. .

Info for this part was:

Employee Jacob T
Video Edited:
Jacob T

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.