bing tracking image

Curt Hitch Fabrication Parts - Receiver Tube - E17 Review

content loading

Customers compare E17 to these similar products

Products Featured in this Video

Review of Curt Hitch Accessories E17

Today we're going to be taking a look at part number E17. This is the Curt Weld-On 2" Receiver which is going to be perfect for custom fabricated hitches. It's designed with the appropriately sized tubes for easy insertion of your ball mount or hitch mount accessories. The receiver opening is going to measure 2" by 2". It's also going to feature the nice forged collar that has a ProDesign as well as a raw finish over the entire unit. That's going to require less prep work when you are ready to weld this on for your installation. Again, 2" by 2" trailer hitch opening.

You're going to have your standard 5/8" pin hole diameter. This is going to be rated with a 5,000 pound gross towing weight, 500 pound tongue weight capacity. A few measurements to go over real quick. I'm going to be measuring the side plates here. They're going to give us an overall length 5-1/2", overall height 4-1/2". The overall length from edge to edge, looks like it's going to measure about 11".

Outside edge to outside edge, that's going to give us a measurement of 2-7/8". Inside edge to inside edge looks like it's going to measure about 2-3/8". That's going to do it for our review of part number E17. This is the Curt Weld-On 2" Receiver for Custom Fabricated Hitches. .

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Leah B
Edited By:
Leah B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.