bing tracking image

Review of Curt Hitch Pins and Clips - Standard Hitch Pin - C21510

content loading

Customers compare C21510 to these similar products




Products Featured in this Video



Curt Hitch Pins and Clips - Standard Hitch Pin - C21510 Review


Jeff: Hello everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this Curt class three, class four and class five hitch pin and clip, that fits two inch and two and a half inch hitch receivers. This hitch pin is what will secure your hitch mounted accessory in your trailer hitch receiver. The pin itself has a nice heat treated steel. It's very strong and durable, has a nice sink finish on it to resist corrosion, and if you notice on the clip and on the pin, it does have plastic grips on the ends right here, and those plastic grips make it easy to install and remove.

Same way on the clip, push it in and pull it out to remove it.A few specs on this. Again, it is designed to fit two inch by two inch and two and a half inch by two and a half inch trailer hitch receivers. The pin diameter is five eighths of an inch. Overall length, if we measure from this end to this end, on the pin itself is going to be right at five and one quarter inches. And the usable length would be once we install the clip and that's from inside the clip to the spot right there where it starts to bend is going to be right at three and one eighths inches for usable length, but that should do it for the review on this Curt class three, class four and class five hitch pin and clip for the two inch and two and a half inch hitch receivers..


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.