Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide: The Breakdown Video

Hey David, Those part numbers unfortunately didn't come back to anything so the next step would be measuring the width of the frame rails and seeing how much of a drop would be needed to clear the rear fascia. For example, the Curt #C13702 you…

The distance between the bolt holes from side-to-side on the Buyers Products Hitch Plate with Receiver Tube #3371809067 are 35.05 inches apart. The height of the mounting flange is 6-1/2 inches. The distance between the bottom of the flange to the…

I went out to the warehouse and measured Curt trailer hitch #C13704 for you. The distance from the top of the mounting flanges to the top of the cross tube is 2 inches. I have included some pictures with additional measurements for you.

The cross tube on the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide #C13704 is 68.5 inches from tip to tip without the hanging brackets. It has a max weight capacity of 5000 pounds and a max tongue weight of 500 pounds.…

The Adjustable Width Trailer Hitch Receiver #C13701 is 51 inches from end to end (see accompanying photo), so to fit your camper you will want to go to the next size up, the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 68-1/2"…

The distance from the two bolt holes on each side bracket for the Curt Adjustable Width Trailer Hitch Receiver #C13702 is right at 8-5/8" (center to center). I have also attached a diagram to assist. This adjustable hitch will fit frame widths…

We highly recommend against double towing and many states either don't allow double (some states call it triple) towing or have numerous restrictions. Some states limit the total length of all 3 units, some only allow certain types of trailers…

I checked with Curt and was able to find a couple of diagrams of the mounting bracket and the receiver portion for the Adjustable Width Trailer Hitch Receiver item #13703. I have attached them below. The width is adjustable between 22" and…

If you are looking for a trailer hitch to mount on your RV then the highest rated capacity is the Curt Trailer Hitches parts #C13702 and #C13701 which are both rated for a max of 6,000 lbs towing when a weight distribution (WD) system is used. These…

The distance from the back of cross tube to the face of the hitch tube on the Adjustable Width Trailer Hitch Receiver, #C13702 is 8-3/4". Please see the product review video that is attached.

Thanks for the pictures! 2" hitches do not all have a 5,000 lbs capacity. The capacity varies by vehicle. That is an old Reese 06497 hitch and the sticker is correct. It does indeed top out at 3,500 lbs. It looks like this hitch came on all of…

The frame not being exposed isn't a big issue since it's just covered up with some corrugated plastic sheeting that can easily be pulled down and cut to fit in accessories. The real issue is going to be with the bumper since it sits right…