bing tracking image

Curt Trailer Hitch - Custom Fit Hitch - 13333 Review

content loading

Customers compare 13333 to these similar products




Products Featured in this Video



Review of Curt Trailer Hitch 13333


Today we are going to review Part Number 13333. This is the Curt Class 3, 2 Inch Trailer Receiver. This is a custom fit hitch designed specifically to fit your vehicle. It will fit the Dodge Ram 1500, the 2500 HD, and 3500 HD trucks without the factory hitch starting in 2003. Now what I would recommend on any custom fit part is to go to our website, use our fit guide, put in your year and model vehicle and it will show you if this will work for your application. Now when this is built, they use precision robotic welding to help maximize the strength of this hitch and it improves the fit of it. It is a bolt on installation.

There is no welding required. It comes with the complete hardware kit shown here and a set of installation instructions also. Basically includes the two carriage bolts, the two hex flange nuts, the two spacers, the two fish wires, this one large flat head socket cap screw and the detailed instructions. Now on the hitch itself, you can see has a nice gloss black powder coat finish over a protective base coat. This will offer superior rust resistant. This does require a ball mount and a pin and clip to hold into place.

Those two items would be sold separately. We sell them separately on our website and they are usually on this product page as related products. This part is made in the USA. Now a few specs on this. The receiver opening is 2 inches by 2 inches. The rating again on this again is a Class 3, so that would mean the maximum gross trailer weight capacity on this is 6000 lbs, maximum tongue weight capacity is 600 lbs.

Now if you do use this with weight distribution, it would increase those numbers to maximum gross trailer weight capacity to 10,000 lbs and the maximum tongue weight capacity to 1000 lbs. Basically, when you go to install this and if you will notice, it also has the safety chain holes to hook your safety chains to. Then you will see the threaded hole right in the top here. When you go to install this basically you will use the fish wire and again, these instructions will show you all this. You run your two carriage bolts with the spacers through your bumper support tube in the back and they will come through here and they will allow you to bolt this hitch on to your bumper support tube and you will put the flange nuts and tighten it down to correct torque specs. Then what you will also do is there is a bracket that is on the top of the bumper support tube that will go up underneath the bumper and you access the hole right here on this hitch by removing the cover that is on the hole in the bumper where the trailer ball hole goes.

Then you will just take this large bolt, tighten this down to the bracket also on the bumper support tube. Then with all that done, you will be all ready to go. That should do it for the review on Part Number 13333, the Curt Class 3, 2 Inch Trailer Receiver.


Kevin N.

3/24/2019

I very appreciate this video I have a 2002 Pontiac Grand Prix and when I search it in autozone it said it fits so I checked under my car and noticed the framing running just right so it slides right up and bolts on will it actually fit

Etrailer Expert

Rachael H.

3/25/2019

I have provided a link for your reference to the hitches that are confirmed as a fit for your 2002 Grand Prix. This hitch is not a fit for your 2002 Pontiac Grand Prix, it is designed to work with select 2004 - 2019 Ram trucks.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Jared G
Test Fit:
Jared G
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Patrick B
Video Edited:
Patrick B
Employee Andrew L
Video Edited:
Andrew L
Employee Chris R
Video Edited:
Chris R
Employee Jeff D
Installed by:
Jeff D
Employee Kathleen M
Video by:
Kathleen M
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.